Effects of heat input on microstructure and mechanical properties of Fe–2Cr–Mo–0.12C steel
- 1 March 2018
- journal article
- research article
- Published by SAGE Publications in Materials Science and Technology
- Vol. 34 (5) , 538-546
Abstract
Thermal simulated specimens with the heat inputs of 20, 50 and 80 kJ/cm were used to investigate the effects of heat input on the microstructure and mechanical properties of the Fe–2Cr–Mo–0.12C pressure-vessel steel. The results indicated that the microstructures in the coarse-grained heat affected zone of tested steels with various heat inputs were mainly consisted of lath martensite and bainite ferrite. As the heat input increased, the fraction of martensite decreased and the bainite ferrite fraction increased. The toughness (tested at −40°C) and hardness for the heat input of 50 kJ/cm were 102 J and 346 HV, respectively, which was attributed to the high-volume fraction (60%) of the high-angle grain-boundary and the fine bainite lath. This paper is part of a thematic issue on Nuclear Materials.Keywords
Funding Information
- National Natural Science Foundation of China (51274062)
- Research Fund for the Doctoral Program of Higher Education of China (20130042110040)
This publication has 28 references indexed in Scilit:
- Evolution and coarsening of carbides in 2.25Cr-lMo steel weld metal during high temperature temperingJournal of Iron and Steel Research International, 2010
- Microstructure and high strength–toughness combination of a new 700MPa Nb-microalloyed pipeline steelMaterials Science and Engineering: A, 2008
- Characterisation of bimodal grain structures in HSLA steelsMaterials Characterization, 2007
- The morphology and crystallography of lath martensite in alloy steelsActa Materialia, 2006
- Crystallographic features of lath martensite in low-carbon steelActa Materialia, 2006
- Hardness Based Creep Life Prediction for 2.25Cr-1Mo Superheater Tubes in a BoilerISIJ International, 2006
- Effect of service exposure on the mechanical properties of 2.25Cr–1Mo pressure vessel steel in a hot-wall hydrofining reactorMaterials Science and Engineering: A, 2005
- Cleavage fracture in bainitic and martensitic microstructuresActa Materialia, 1999
- The Weldability of Modern Structural TMCP Steels.ISIJ International, 1997
- Austenite grain growth, microstructure and hardness in the heat-affected zone of a 2.25 Cr-1Mo steelMaterials Science and Engineering: A, 1989