A new computational approach for modelling the microstructural evolution and residual lifetime assessment of MCrAlY coatings
Authors:
- R. PillaiRPR. Pillai
- W. G. SloofWSW. G. Sloof
- A. ChyrkinACA. Chyrkin
- L. SingheiserLSL. Singheiser
- W. J. QuadakkersWQW. J. Quadakkers
- 19 January 2015
- journal article
- Published by Taylor & Francis in Materials at High Temperatures
- Vol. 32 (1-2) , 57-67
Abstract
MCrAlY (M = Ni, Co) coatings are commonly used to protect the underlying superalloy component in industrial gas turbines and aeroengines from oxidation attack. They also function as bond coats for thermal barrier coatings (TBC). The chemical life time of the coated component is mainly governed by the depletion of the β-phase in the bond coat as a result of simultaneously occurring surface oxidation and interdiffusion between the coating and the substrate. A new computational approach to model the microstructural evolution in MCrAlY (M = Ni, Co) coatings on Ni base superalloys was undertaken in the present study. Scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and wavelength dispersive X-ray spectroscopy (WDX) was employed to characterise MCrAlY coated superalloy samples after exposure at 1000 and 1100°C. Phases were identified by electron backscatter diffraction (EBSD) and correlated with SEM/EDX/WDX analyses.Modelling of the microstructural evolution was carried out considering simultaneously occurring surface oxidation and interdiffusion processes. A flux based calculation of the concentration profiles and stable phases was performed, taking into account diffusion of all elements in the γ, γ' and β-NiAl phases. Good agreement was found between the observed and computed phase distributions after specific time intervals. The computed widths of the β-depletion zones showed satisfactory agreement with the measurements. Additionally, the model was able to predict the formation of a TCP-phase and its penetration into the substrate with increasing exposure time in one of the investigated coating systemsKeywords
This publication has 46 references indexed in Scilit:
- Failure mechanisms of thermal barrier coatings on MCrAlY-type bondcoats associated with the formation of the thermally grown oxideJournal of Materials Science, 2009
- The influence of bond coat surface roughness on chemical failure and delamination in TBC systemsMaterials and Corrosion, 2008
- Temperature dependence of phase relationships in different types of MCrAlY-coatingsSurface and Coatings Technology, 2007
- Effect of surface condition on the oxidation behaviour of MCrAlY coatingsSurface and Coatings Technology, 2006
- Parameters affecting TGO growth and adherence on MCrAlY-bond coats for TBC'sSurface and Coatings Technology, 2006
- Oxidation characteristics of a platinized MCrAlY bond coat for TBC systems during cyclic oxidation at 1000 °CSurface and Coatings Technology, 2005
- Modelling of phase equilibria in MCrAlY coating systemsSurface and Coatings Technology, 2004
- Boundary Additive Effect on Abrasive Wear During Single Asperity Plowing of a 3004 Aluminum AlloyJournal of Tribology, 1999
- Progress in coatings for gas turbine airfoilsSurface and Coatings Technology, 1998
- Substrate and bond coat compositions: factors affecting alumina scale adhesionMaterials Science and Engineering: A, 1998