Electrochemical Conversion of CO 2 via Molten Salt Electrolysis to Produce Hard Carbon Materials for Sodium-Ion Battery
Authors:
Open Access
- 4 February 2026
- journal article
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (6) , 10861-10867
Abstract
The conversion of CO2 into valuable carbon materials is essential for establishing a circular economy. This study syntheses hard carbon materials from CO2 using high-temperature molten salt electrolysis and explores their use as anodes in sodium-ion batteries. CO2 gases are absorbed as carbonate ions in molten salts and then electrochemically decomposed into solid carbon. When electrolysis was conducted at 600 °C in molten LiCl-KCl containing Li2CO3, the generated carbon was amorphous and nongraphitizable, as determined by XRD analysis and Raman spectroscopy. The obtained carbons before and after heat treatments at 900–1800 °C were employed as the anode materials in two-electrode cells with metallic sodium counter electrodes and 1 M NaPF6/EC-DMC electrolyte. for sodium ion battery. The carbon treated at 900 °C showed the highest capacity, exceeding that of commercial hard carbon materials. These results demonstrate the potential of CO2 reduction and technologies for converting CO2 into valuable carbon materials for energy storage devices.Keywords
Funding Information
- New Energy and Industrial Technology Development Organization (JPNP16002)
This publication has 45 references indexed in Scilit:
- Oxygen evolution behavior of La1−xSrxFeO3−δ electrodes in LiCl–KCl meltJournal of Applied Electrochemistry, 2023
- Molten salt electrochemical upcycling of CO2 to graphite for high performance battery anodesCarbon, 2023
- Assessing the structural properties of graphitic and non-graphitic carbons by Raman spectroscopyCarbon, 2020
- Direct Conversion of Greenhouse Gas CO2 into Graphene via Molten Salts ElectrolysisChemSusChem, 2016
- Hard Carbon Anodes for Na‐Ion Batteries: Toward a Practical UseChemElectroChem, 2015
- Electrochemical behavior of MgO-templated mesoporous carbons in the propylene carbonate solution of sodium hexafluorophosphateJournal of Applied Electrochemistry, 2015
- Sodium‐Ion BatteriesAdvanced Functional Materials, 2012
- Electrode Materials for Rechargeable Sodium‐Ion Batteries: Potential Alternatives to Current Lithium‐Ion BatteriesAdvanced Energy Materials, 2012
- Electrochemical Na Insertion and Solid Electrolyte Interphase for Hard‐Carbon Electrodes and Application to Na‐Ion BatteriesAdvanced Functional Materials, 2011
- Preferential alignment of carbon layers around pores in hard carbon and multi-phase graphitizationCarbon, 1975