Thermal Runaway of a REBCO Coil Co-Wound With a Copper Tape Immersed in Liquid Nitrogen/Hydrogen

Authors:
Open Access
Publisher website
Google Scholar
Abstract
Aiming at the establishment of design criteria for cryostable HTS magnets, we have investigated the behavior of thermal runaway of REBCO three-turn coils immersed in liquid nitrogen and liquid hydrogen. Sample 1 consisted of a REBCO tape with a copper layer 0.1 mm thick and a co-wound copper tape 0.2 mm thick, and Sample 2 consisted of the REBCO tape only. Each conductor was wound in a groove of a G10 plate, and only an upper side of the coil was cooled with cryogen. In order to simulate local degradation, the testing part, 0.1 m long, was damaged by bending, and critical currents at 77 K were reduced to less than 1/10 of the original value of 120 A. In liquid nitrogen, thermal runaway of Sample 1 occurred at 107 A after wide propagation of a normal zone, while that of Sample 2 occurred at 57 A before propagation of a normal zone. In liquid hydrogen, thermal runaway of both samples occurred before propagation of a normal zone, and the amount of heat generation of Sample 1 when starting thermal runaway was 1.5–1.8 times as high as that of Sample 2, which was lower than the ratio of the wetted areas. The co-wound copper tape was less effective for the short normal zone, and it worked effectively as a bypass-current path after wide propagation of a normal zone.
Funding Information
  • NIFS research program (NIFS23MIS009)

This publication has 18 references indexed in Scilit: