Change of electronic structure of ultrathin film of indium tin oxide by “In situ” Ar+ ion non-reactive successive etching process
Open Access
- 27 October 2025
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-11
Abstract
“In situ” argon (Ar+) ion non-reactive successive sputtering/etching process was used to produce ultrathin films of indium tin oxide nanomaterial. In each sputter/etch-cycle (τetch = 300s), x-ray photoelectron spectroscopy (XPS) and ultraviolet photoemission spectroscopy (UV PES) were measured and studied their change of electronic/bonding/atomic structure, density-of-states (DOS), valence band maximum (VBM), and work functions of the ultrathin films of indium-tin-oxide nanomaterial. During Ar+-ion non-reactive successive sputtering/etching process ((τetch = 0–1800 s) the thicknesses are reducing from 100 nm (ITO) ≈ 2.0 nm (ultrathin films of indium-tin-oxide). These results were further revealed with the “ex-situ” HR-SEM, HR-TEM, AFM, XRD, Raman, and x-ray absorption near edge structure (XANES) spectroscopy measurements, where a small shift of the Raman mode (A1g) peak with reduced intensity and XANES edge-shift with change in line shape/intensities further confirmed the formation of ultrathin films of indium-tin-oxide nanomaterial. The SEM/TEM/AFM of Ar+-ion sputtered/etched (τetch = 1800 s) of these films are considered as an alternative technique to make ultrathin films of indium-tin-oxide nanomaterial for the fabrication of future electronic/optoelectronic/photovoltaic devices.Keywords
Funding Information
- Siksha 'O' Anusandhan Deemed to be University
This publication has 39 references indexed in Scilit:
- Tailoring structural, electrical, and optical properties of ITO thin films via vacuum-pressure annealing: An experimental and theoretical studyJournal of Alloys and Compounds, 2025
- Indium tin oxide thin film preparation and property relationship for humidity sensing: A reviewEngineering Reports, 2024
- Demonstration of Low Work Function Perovskite SrVO3 Using Thermionic Electron EmissionAdvanced Functional Materials, 2022
- Hydrogen dissociation sites on indium-based ZrO2-supported catalysts for hydrogenation of CO2 to methanolCatalysis Today, 2022
- Indium local geometry in In-Sb-Te thin films using XANES and DFT calculationsApplied Surface Science, 2017
- Structural, Optical and Electrical Properties of ITO Thin FilmsJournal of Electronic Materials, 2017
- An in situ XPS study of growth of ITO on amorphous hydrogenated Si: Initial stages of heterojunction formation upon processing of ITO/a-Si:H based solar cell structuresPhysica Status Solidi (a), 2014
- Novel Highly Conductive and Transparent Graphene‐Based ConductorsAdvanced Materials, 2012
- Crystallization and conductivity mechanism of ITO films on different substrates deposited with different substrate temperaturesJournal of Wuhan University of Technology-Mater. Sci. Ed., 2010
- Work function of sol–gel indium tin oxide (ITO) films on glassApplied Surface Science, 2006