Hydrolytic Degradation and Assessment of Performance of PLA and PBS‐Based Plastics Designed for Packaging Applications
Authors:
- Alberto LagazzoALAlberto Lagazzo
- Cristina MolinerCMCristina Moliner
- Elisabetta FinocchioEFElisabetta Finocchio
- Samantha CaputoSCSamantha Caputo
- Elisabetta AratoElisabetta Arato
Open Access
- 1 January 2025
- journal article
- Published by Wiley in International Journal of Polymer Science
- Vol. 2025 (1)
Abstract
Biopolymers based on poly(lactic acid) (PLA) and poly(butylene succinate) (PBS) reinforced with mineral fillers were studied in this work. The mechanical, spectroscopic (FTIR), and morphological (SEM) features of the raw samples were evaluated and compared with those of samples after immersion at diverse temperature (25°C, 37°C, and 70°C) in different degradation mediums (i.e., buffer solutions at pH = 3, 5, and 7.5), simulating their applications as soft and rigid packaging in food containers and cosmetic packaging, respectively. The amount of absorbed water, M s , increased with the increasing temperature as well as the diffusivity, D , indicating faster water diffusion rates. The pH slightly affected M s whereas it produced contrary trends on D : acidic mediums were more aggressive for PLA‐based materials (from 2.2∙10 8 cm 2 /s at pH = 3 to 1∙10 8 cm 2 /s at pH = 7.5 at 25°C) whereas higher pHs resulted in an increase on D for PBS‐based ones (from 1∙10 8 cm 2 /s at pH = 3 to 3.4∙10 8 cm 2 /s at pH = 7.5 at 25°C). The effect of temperature on their mechanical performance, and thus on the aging/degradation of the materials, was predominant, as also evidenced by the morphological analysis, with the pH of the liquid media used to simulate the different packaging applications displaying only a marginal role. FTIR for both PLA and PBS‐based materials indicated that the typical features of the polymers were not significantly changed at the different tested temperatures and no degradation products were detected at pH 3, 5, and 7.5. The obtained results showed the suitability of the PLA and PBS‐based biocomposites for soft and rigid packaging applications where high temperatures are not required for long periods of time. These results will help in the designing of the new improved biocomposites to meet with the target objectives on their applications as packaging materials through the definition of the parameters to be tuned to tailor the bioplastics according to their specific needs.Keywords
Funding Information
- Horizon 2020 Framework Programme (860407)
This publication has 29 references indexed in Scilit:
- Functional properties of food packaging solutions alternative to conventional multilayer systemsJournal of Food Science and Technology, 2024
- Water absorption behavior and physico‐chemical and mechanical performance of PLA‐based biopolymers filled with degradable glass fibersJournal of Applied Polymer Science, 2023
- A comprehensive review on polylactic acid (PLA) – Synthesis, processing and application in food packagingInternational Journal of Biological Macromolecules, 2023
- Biodegradable polymers- a greener approach for food packaging2023
- A review of biodegradable plastics to biodegradable microplastics: Another ecological threat to soil environments?Journal of Cleaner Production, 2021
- Influence of Fillers on the Thermal and Mechanical Properties of Biocomposites: An Overview2020
- Hydrolysis of polylactide in aqueous mediaJournal of Applied Polymer Science, 2016
- Hydrolytic degradation of biodegradable polyesters under simulated environmental conditionsJournal of Applied Polymer Science, 2015
- Properties of kenaf fiber/polylactic acid biocomposites plasticized with polyethylene glycolPolymer Composites, 2009
- Hydrolytic degradation behavior of poly(butylene succinate)s with different crystalline morphologiesJournal of Applied Polymer Science, 2000