Effect of Phosphorus Content on Mechanical Properties of Electrodeposited Fe-C-P Alloys
Authors:
- 1 January 2004
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 151 (10) , C645-C648
Abstract
Fe-C-P alloy films were electrodeposited from an iron (II) chloride solution containing citric acid and phosphinic acid (hypophosphorous acid) at 323 K. Effect of phosphorus content on mechanical properties such as Vickers hardness, fracture toughness, and wear resistance was systematically examined and changes in mechanical properties were discussed based on the data measured by X-ray diffraction, X-ray photoelectron spectroscopy, and scanning electron microscopy. It was disclosed that the Fe-C-P alloy films had a martensitic phase with a body centered tetragonal structure. The Fe-C-P alloys showed excellent mechanical properties compared to Fe-C alloys as judged from the measurements of Vickers hardness, fracture toughness, and wear resistance. The oxygen content of the films decreased significantly with increasing concentration of phosphinic acid in the palting solution. Addition of phosphinic acid to the electrolyte is an effective way to reduce the oxygen content of the films. Excellent wear resistance of Fe-C-P alloy films is associated with higher hardness and improved fracture toughness as a result of codeposition of phosphorus which reduced the oxygen content of the films. © 2004 The Electrochemical Society. All rights reserved.Keywords
This publication has 8 references indexed in Scilit:
- Martensitic Iron-Carbon-Boron Alloy Electrodeposit with Improved Mechanical PropertiesJournal of the Electrochemical Society, 2002
- Oxygen Incorporation during the Electrodeposition of Ni, Fe, and Ni‐Fe AlloysJournal of the Electrochemical Society, 1998
- Passivation of Fe(110) via phosphorus deposition: the reactions of trimethylphosphiteSurface Science, 1998
- Electrodeposition of Fe‒C Alloys from Baths Containing Dicarboxylic Acids with a Linear Alkyl ChainJournal of the Electrochemical Society, 1996
- Structural characterization of martensitic iron-carbon alloy films electrodeposited from an iron(ll) sulfate solutionMetallurgical and Materials Transactions A, 1996
- A Mathematical Model for Anomalous Codeposition of Nickel‐Iron on a Rotating Disk ElectrodeJournal of the Electrochemical Society, 1989
- An investigation of the lattice parameters of α‐(Fe, P) alloysSteel Research, 1988
- Whole-powder-pattern fitting without reference to a structural model: application to X-ray powder diffraction dataJournal of Applied Crystallography, 1986