A high‐gain cladded waveguide amplifier on erbium doped thin‐film lithium niobate fabricated using photolithography assisted chemo‐mechanical etching
Open Access
- 17 January 2022
- journal article
- research article
- Published by Wiley in Nanophotonics
- Vol. 11 (5) , 1033-1040
Abstract
Erbium doped integrated waveguide amplifier and laser prevail in power consumption, footprint, stability and scalability over the counterparts in bulk materials, underpinning the lightwave communication and large‐scale sensing. Subject to the highly confined mode in the micro‐to‐nanoscale and moderate propagation loss, gain and power scaling in such integrated devices prove to be more challenging compared to their bulk counterparts. In this work, a thin cladding layer of tantalum pentoxide (Ta 2 O 5 ) is employed in the erbium doped lithium niobate (LN) waveguide amplifier fabricated on the thin film lithium niobate on insulator (LNOI) wafer by the photolithography assisted chemo‐mechanical etching (PLACE) technique. Above 20 dB small signal internal net gain is achieved at the signal wavelength around 1532 nm in the 10 cm long LNOI amplifier pumped by the diode laser at ∼980 nm. Experimental characterizations reveal the advantage of Ta 2 O 5 cladding in higher optical gain compared with the air‐clad amplifier, which is further explained by the theoretical modeling of the LNOI amplifier including the guided mode structures and the steady‐state response of erbium ions.Keywords
All Related Versions
This publication has 29 references indexed in Scilit:
- High-power fibre lasersNature Photonics, 2013
- Energy-Transfer-Upconversion Models, Their Applicability and Breakdown in the Presence of Spectroscopically Distinct Ion Classes: A Case Study in Amorphous Al2O3:Er3+The Journal of Physical Chemistry C, 2013
- Lithium niobate on insulator (LNOI) for micro‐photonic devicesLaser & Photonics Reviews, 2012
- Giant Optical Gain in a Rare‐Earth‐Ion‐Doped MicrostructureAdvanced Materials, 2011
- Erbium‐doped integrated waveguide amplifiers and lasersLaser & Photonics Reviews, 2010
- Gain bandwidth of 80 nm and 2 dB/cm peak gain in Al_2O_3:Er^3+ optical amplifiers on siliconJournal of the Optical Society of America B, 2010
- Accurate measurement of 1.5 μm lifetime of Er3+ in LiNbO3 crystals and waveguidesJournal of Applied Physics, 2003
- Time-dependent modeling of erbium-doped waveguide lasers in lithium niobate pumped at 980 and 1480 nmIEEE Journal of Quantum Electronics, 1997
- 980-nm-pumped Er-doped LiNbO/sub 3/ waveguide amplifiers: a comparison with 1484-nm pumpingIEEE Journal of Selected Topics in Quantum Electronics, 1996
- Theoretical modeling of optical amplification in Er-doped Ti:LiNbO/sub 3/ waveguidesIEEE Journal of Quantum Electronics, 1994