Experimental Study on Bending Fatigue Performance of ADI Gears Under Different Applied Load Levels
Open Access
Abstract
As austempered ductile iron (ADI) is a key gear material for meeting the lightweight and cost-effective demands of new energy vehicles, its bending fatigue performance has a direct impact on vehicle transmission efficiency. In the present work, QTD 800 gears were subjected to bending fatigue testing using a combination of the conventional group method and the staircase method, with considerations given to fatigue life and fatigue limit at different reliability levels. Subsequently, the gears were characterized using optical microscopy and a microhardness tester to examine their metallographic structure and determine their hardness. The results indicate that the bending fatigue limits corresponding to gear reliability levels of 50%, 90%, and 99% are 390.00 MPa, 372.55 MPa, and 358.32 MPa, respectively. It was also observed that higher gear life stability corresponds to a lower sustainable fatigue limit stress. The analyses further reveal that under low loads, the main crack exhibits a relatively straight and smooth propagation trajectory, formed through the slow extension of an existing crack, whereas under high loads, the main crack displays a rough and serrated appearance, arising from the coalescence of microcracks initiated around graphite nodules.Keywords
Funding Information
- Zhongyuan Talent Program (ZYYCYU202012112, 2023SJGLX021Y, Yukeshi2024-01)
- Graduate Education Reform Project of Henan Province (ZYYCYU202012112, 2023SJGLX021Y, Yukeshi2024-01)
- Water Conservancy Equipment and Intelligent Operation and Maintenance Engineering Technology Research Centre in Henan Province (ZYYCYU202012112, 2023SJGLX021Y, Yukeshi2024-01)
This publication has 20 references indexed in Scilit:
- The proportion between the gear bending fatigue crack initiation and total life: A quantitative studyEngineering Failure Analysis, 2025
- The effect of gear module on bending fatigue failure location in carburized and shot-peened spur gearsInternational Journal of Fatigue, 2025
- Lightweight innovation ADIs help development of renewable energy and new technology industries in ChinaChina Foundry, 2024
- A numerical model for total bending fatigue life estimation of carburized spur gears considering the hardness gradient and residual stressMeccanica, 2024
- Lightweighting in the automotive industry as a measure for energy efficiency: Review of the main materials and methodsHeliyon, 2024
- A study of the effect of dual shot peening on the surface integrity of carburized steel: combined experiments with dislocation density-based simulationsArchives of Civil and Mechanical Engineering, 2024
- Investigating different nodular graphite irons for the application of gears—a step towards standardization by using reasonable quality criteriaForschung im Ingenieurwesen, 2023
- Experimental investigation of crack growth behaviors and mechanical properties degradation during gear bending fatigueJournal of Mechanical Science and Technology, 2022
- Effect of isothermal quenching on microstructure and hardness of GCr15 steelJournal of Materials Research and Technology, 2021
- A rotating gear test methodology for evaluation of high-cycle tooth bending fatigue lives under fully reversed and fully released loading conditionsInternational Journal of Fatigue, 2020