Influence of the final thermal sealing on the properties of combined anodic alumina/cerium conversion coatings on AA2024-T3 aircraft alloy
Open Access
- 31 January 2023
- journal article
- research article
- Published by University of Chemical Technology and Metallurgy in Journal of Chemical Technology and Metallurgy
- Vol. 58 (5) , 881-896
Abstract
The current research presents results following corrosion tests, performed on combined anodic alumina/cerium conversion coatings (Al 2 O 3 /CeCC), thermally sealed for 15 min at 100°C either in boiling water or in hot-air medium. The coatings were formed on AA2024-T3 aircraft alloy substrates, at the optimum conditions of anodization and cerium conversion coating deposition, described in previous works. Prior to the corrosion tests, both the color characteristics and wetting ability of the combined films were evaluated. The corrosion protective properties of the sealed films were assessed by means of Electrochemical Impedance Spectroscopy (EIS) and Potentiodynamic Polarization (PDP). The measurements were performed after 672 hours of exposure to a 5 % NaCl model corrosive medium (MCM). Additional long term (up to 1344 hours of exposure) durability tests were then performed under the same conditions for the samples and superior performance was established. The electrochemical measurements were conducted regularly, once a week. Low-and high-resolution Scanning Electron Microscopy (SEM) studies were performed on selected samples. The experimental results have shown that the sealing procedure in an aqueous environment enhances the corrosion protective ability and durability of the coating, probably due to formation of a hydrate layers, that suppresses the access of corrosive species to the surface of the substrate. This inference was additionally confirmed by the subsequent chemical analysis by means of X-Ray Photoelectron Spectroscopy (XPS). The results acquired have also shown that the incorporated Ce is predominantly in the form of Ce(IV)-oxides/hydroxides and after the thermal treatment almost entirely consists of cerium.Keywords
This publication has 64 references indexed in Scilit:
- Efficiently Improved Corrosion Resistance of Electrodeposition Ni–Cu Coatings via Site‐Blocking Effect of CeAdvanced Engineering Materials, 2022
- A concise review on corrosion inhibitors: types, mechanisms and electrochemical evaluation studiesJournal of Coatings Technology and Research, 2021
- Comprehensive Review and Critical Data Analysis on Corrosion and Emphasizing on Green Eco-friendly Corrosion Inhibitors for Oil and Gas IndustriesJournal of Bio- and Tribo-Corrosion, 2021
- Zinc Anodizing: Structural Diversity of Anodic Zinc Oxide Controlled by the Type of ElectrolyteChemElectroChem, 2021
- Na4Mn9O18 nanowires wrapped by reduced graphene oxide as efficient sulfur host material for lithium/sulfur batteriesJournal of Solid State Electrochemistry, 2019
- Ceria-based coatings and pigments2019
- Quantum‐Tunneling Metal‐Insulator‐Metal Diodes Made by Rapid Atmospheric Pressure Chemical Vapor DepositionAdvanced Functional Materials, 2018
- Mechanically stable flat anodic titania membranes for gas transport applicationsJournal of Porous Materials, 2011
- Sheet AA2024‐T3: a new investigation of microstructure and compositionSurface and Interface Analysis, 2010
- Anodic Oxide Films1971