Process optimization of laser melting deposition for DZ125L based on machine learning
Authors:
- 25 March 2026
- journal article
- Published by Emerald Publishing in Rapid Prototyping Journal
- Vol. 32 (9) , 1-13
Abstract
Purpose: The purpose of this paper is to accurately predict and optimize the process parameters of laser metal deposited Ni-based superalloys using machine learning (ML). Design/methodology/approach: Orthogonal experiments were carried out to obtain the raw data and determine the effects of parameters on the geometric characteristics of the deposition layer. A support vector regression (SVR) model based on the Crested Porcupine Optimizer (CPO) algorithm for predicting the geometric characteristics of the deposition layer is proposed. The Multi-objective Red-billed Blue Magpie Optimizer (MORBMO) algorithm was adopted to optimize the process parameters. Findings: Laser power has the greatest effect on depth and width, and scanning speed has the most pronounced impact on height. Both scanning speed and powder feeding rate have a significant impact on the wetting angle. Compared with the classical SVR model, the CPO-SVR improves the R2 values of height, depth, width and wetting angle by 20.72%, 20.16%, 11.27% and 17.78%, respectively, and reduces the MAPE by 36.43%, 8.53%, 3.95% and 9.83%, respectively. The optimized parameters were determined to be a laser power of 1165 W, a scanning speed of 9 mm/s and a powder feed rate of 0.8 r/min. Then, the relative density of the bulk specimen fabricated using these parameters was increased by 1.03% compared to that prepared with the process parameters optimized by previous process experiments. Originality/value: The findings of this study demonstrate the potential of the proposed ML method based on CPO-SVR and MORBMO algorithms for the prediction and optimization of laser-melting-deposited Ni-based superalloys.Keywords
This publication has 39 references indexed in Scilit:
- Red-billed blue magpie optimizer: a novel metaheuristic algorithm for 2D/3D UAV path planning and engineering design problemsArtificial Intelligence Review, 2024
- Soft computing-based process optimization in laser metal deposition of Ti-6Al-4 VThe International Journal of Advanced Manufacturing Technology, 2022
- Prediction of molten pool height, contact angle, and balling occurrence in laser powder bed fusionThe International Journal of Advanced Manufacturing Technology, 2022
- Two-step heat treatment for laser powder bed fusion of a nickel-based superalloy with simultaneously enhanced tensile strength and ductilityAdditive Manufacturing, 2021
- Effect of temperature on the microstructure and tensile properties of micro-crack free hastelloy X produced by selective laser meltingAdditive Manufacturing, 2020
- Geometry and dilution rate analysis and prediction of laser claddingThe International Journal of Advanced Manufacturing Technology, 2019
- Advanced Materials for Laser Surface Cladding: Processing, Manufacturing, Challenges and Future Prospects2019
- Geometry Characteristics Prediction of Single Track Cladding Deposited by High Power Diode Laser Based on Genetic Algorithm and Neural NetworkInternational Journal of Precision Engineering and Manufacturing, 2018
- Effect of heat treatment on the microstructural evolution of a nickel-based superalloy additive-manufactured by laser powder bed fusionActa Materialia, 2018
- Multiresponse Optimization of Laser Cladding Steel + VC Using Grey Relational Analysis in the Taguchi MethodJOM, 2016