Design and Rate Control of Large Titanium Alloy Springs for Aerospace Applications
Open Access
Abstract
During the separation between satellite and launch vehicles, large steel springs are often used as compression separation spring sets in a catapult separation system. Replacing the steel springs with titanium alloy springs could reduce weight by about 50%. Although titanium alloy springs have been widely used in the aerospace field due to their excellent performance, there are few reports on the design of high-precision titanium alloy springs. The current spring design standards mainly focus on steel springs with helix angles between 5° and 9°, which are not applicable to titanium springs. Moreover, the change in spring rate with ambient temperature should also be considered. In this paper, β-C titanium alloy was used to design and prepare large compression separation springs, replacing steel springs in the catapult separation system. The design of titanium alloy springs took into account the big helix angle. The relationship between helix angle and the number of active coils was calculated. The parameters of titanium alloy springs were determined by the shear stress of the spring at working length. The effects of aging temperature and aging duration on the mechanical properties and modulus of β-C alloy were studied. By adjusting the aging process, the β-C alloy spring rate was controlled to meet the design requirements. The effect of ambient temperature on the mechanical properties and modulus of β-C titanium alloy were also investigated. It was found that as the ambient temperature increased, the rate of the β-C alloy spring gradually decreased.Keywords
Funding Information
- International Science & Technology Cooperation Program of Shaanxi Province (2022KW-041, 2024GH-ZDXM-17)
This publication has 15 references indexed in Scilit:
- A review on heat treatment efficiency in metastable β titanium alloys: the role of treatment process and parametersJournal of Materials Research and Technology, 2020
- A strong and ductile Ti-3Al-8V-6Cr-4Mo-4Zr (Beta-C) alloy achieved by introducing trace carbon addition and cold workScripta Materialia, 2020
- Predicting temperature dependence of the shear modulus of metallic glasses using calorimetric dataScripta Materialia, 2019
- Design of low modulus β-type titanium alloys by tuning shear modulus C44Journal of Alloys and Compounds, 2018
- Enhanced photocatalytic properties of molybdenum‐doped BiVO 4 prepared by sol–gel methodRare Metals, 2016
- Optimization design of satellite separation systems based on Multi-Island Genetic AlgorithmAdvances In Space Research, 2014
- Low Young’s modulus of Ti–Nb–Ta–Zr alloys caused by softening in shear moduli c′ and c44 near lower limit of body-centered cubic phase stabilityActa Materialia, 2010
- Microstructural gradients in Ti–3Al–8V–6Cr–4Zr–4Mo for excellent HCF strength and toughnessMaterials Science and Engineering: A, 1998
- Titanium alloy springsMaterials & Design (1980-2015), 1989
- Determination of dynamic young's modulus, shear modulus, and poisson's ratio as a function of temperature for depleted Uranium-0.75 wt% Titanium using the piezoelectric ultrasonic composite oscillator techniqueJournal of Nuclear Materials, 1987