Evaluation of the Austenite Recrystallization by Multideformation and Double Deformation Tests
Authors:
- 27 December 2010
- journal article
- research article
- Published by Wiley in Steel Research International
- Vol. 82 (4) , 369-378
Abstract
A high amount of deformation below the non‐recrystallization temperature (Tnr) is a common industrial practice to achieve a good combination of toughness and strength in microalloyed steels. To combine the industrially relevant optimum combination of high productivity and product quality, an accurate knowledge of Tnr and the recrystallization kinetics is required. Although a lot of literature data is available on the recrystallization behaviour of microalloyed steels, correlations are often difficult to be made due to the effect of different experimental set‐ups and test schedules used to obtain this data. Although it would significantly improve the knowledge about these steels, so far, no systematic comparison has been presented in literature to correlate the different techniques one to another. In this study, different hot rolling simulation techniques and testing schedules were compared, within the experimental constraints of the used equipment, to determine the Tnr temperature of two microalloyed steels. Good agreement was found between the results from different test equipment. Furthermore, the results from the multideformation tests under continuous cooling conditions could be correlated with the results from isothermal double deformation tests.Keywords
This publication has 27 references indexed in Scilit:
- Characterization of the Austenite Recrystallization by Comparing Double Deformation and Stress Relaxation TestsSteel Research International, 2010
- Microstructure and texture evolution during cold rolling and annealing of a high Mn TWIP steelActa Materialia, 2009
- Evolution of austenite static recrystallization and grain size during hot rolling of a V-microalloyed steelMaterials Science and Engineering: A, 2009
- Austenite Recrystallization–Precipitation Interaction in Niobium Microalloyed SteelsISIJ International, 2009
- Determination of Driving and Pinning Forces for Static Recrystallization during Hot Rolling of a Niobium Microalloyed SteelISIJ International, 2005
- Effect of Silicon on the Interaction between Recrystallization and Precipitationin Niobium Microalloyed SteelsISIJ International, 2004
- Effect of Interpass Time and Cooling Rate on Apparent Activation Energy for Hot Working and Critical Recrystallization Temperature of Nb-microalloyed Steel.ISIJ International, 1999
- Effect of Initial Grain Size on the Static Recrystallization Kinetics of Nb Microalloyed Steels.ISIJ International, 1996
- On the recovery and recrystallization which attend static softening in hot-deformed copper and aluminumActa Metallurgica et Materialia, 1990
- The Calculation of Roll Force and Torque in Hot Rolling MillsProceedings of the Institution of Mechanical Engineers, 1954