Effect of Directional Added Mass on Highway Bridge Response during Flood Events
Open Access
- 16 March 2022
- journal article
- research article
- Published by MDPI AG in Infrastructures
- Vol. 7 (3) , 42
Abstract
This article presents a new analysis to determine the variation in modal dynamic characteristics of bridge superstructures caused by hydrodynamic added mass (HAM) during progressive flooding. The natural frequency variations were numerically and experimentally extracted in various artificial flood stages that included dry conditions, semi-wet conditions, and fully wet conditions. Three-dimensional finite element modeling of both subscale and full-scale models were simulated through a coupled acoustic structural technique using Abaqus®. Experiments were performed exclusively on a subscale model at a flume laboratory to confirm the numerical simulations. Finally, an approach to quantify the directional HAM in the dominant axes of vibration was pursued using the concept of effective modal mass. It is shown that specific vibrating modes with the largest effective mass are strongly affected during artificial flood events and are identified as the dominant modes. Numerical simulation shows that large directional HAM is introduced on those dominant modes during flood events. For the full-scale representative bridge, the magnitude of the HAM along the first structural mode was estimated to be over 5.8 times the bridge’s structural modal effective mass. It is suggested that directional HAM should be included during the design of bridges over streamways that are prone to flooding in order to potentially be appended to the AASHTO code.Keywords
Funding Information
- Mid-America Transportation Center, University of Nebraska-Lincoln (DOT 69A3551747107)
This publication has 47 references indexed in Scilit:
- New lumped-mass-stick model based on modal characteristics of structures: development and application to a nuclear containment buildingEarthquake Engineering and Engineering Vibration, 2013
- Free vibration of cantilevered composite plates in air and in waterComposite Structures, 2013
- Equivalent mechanical models of sloshing fluid in arbitrary‐section aqueductsEarthquake Engineering & Structural Dynamics, 2011
- Assessment of potential-based fluid finite elements for seismic analysis of dam–reservoir systemsComputers & Structures, 2009
- Lessons from Hurricane Katrina Storm Surge on Bridges and BuildingsJournal of Waterway, Port, Coastal, and Ocean Engineering, 2007
- Topology optimization of acoustic–structure interaction problems using a mixed finite element formulationInternational Journal for Numerical Methods in Engineering, 2006
- Analysis of Recent Bridge Failures in the United StatesJournal of Performance of Constructed Facilities, 2003
- Linear vibration analysis of cantilever plates partially submerged in fluidJournal of Fluids and Structures, 2003
- FREE VIBRATION OF A PARTIALLY LIQUID-FILLED AND SUBMERGED, HORIZONTAL CYLINDRICAL SHELLJournal of Sound and Vibration, 2002
- Modal identification of output-only systems using frequency domain decompositionSmart Materials and Structures, 2001