Evaluation of the performance of heat pump-assisted distillation of an ethanol–water mixture
- 22 February 2017
- journal article
- distillation
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 52 (8) , 1387-1396
Abstract
The process of separation of an ethanol–water mixture was simulated. A heat pump system was then implemented on the distillation column with the highest energy requirements in the process. Complete elimination of hot and cold utilities of the pretreatment column was obtained through an improved system by application of a heat pump at a compressor work of 406.6 kW. Installation of the heat pump system on the pretreatment column of the system results in a reduction of 10.7% of annual operating costs and 6.6% of the total annual costs (TAC). However, the capital costs of the process will enhance by 22.6%.Keywords
This publication has 27 references indexed in Scilit:
- Waste Heat Recovery through Organic Rankine Cycles in the Bioethanol Separation ProcessIndustrial & Engineering Chemistry Research, 2014
- Incorporation of Mass and Energy Integration in the Optimal Bioethanol Separation ProcessChemical Engineering & Technology, 2013
- Design and optimization of an ethanol dehydration process using stochastic methodsSeparation and Purification Technology, 2013
- Heat integrated distillation operationApplied Energy, 2010
- Economic feasibility of heat pumps in distillation to reduce energy useApplied Thermal Engineering, 2009
- Internally Heat-Integrated Distillation Columns: A ReviewChemical Engineering Research and Design, 2003
- Techno-economic feasibility of high-temperature high-lift chemical heat pumps for upgrading industrial waste heatApplied Thermal Engineering, 2002
- Thermal integration of heat pumping systems in distillation columnsApplied Thermal Engineering, 1999
- Optimal Design of Thermally Coupled Distillation ColumnsIndustrial & Engineering Chemistry Research, 1998
- Rigorous investigation of heat pump assisted distillationHeat Recovery Systems and CHP, 1995