Numerical Study of Dry Reforming of Methane in Packed and Fluidized Beds: Effects of Key Operating Parameters
Open Access
- 20 June 2023
- journal article
- research article
- Published by MDPI AG in Chemengineering
- Vol. 7 (3) , 57
Abstract
Replacing the conventionally used steam reforming of methane (SRM) with a process that has a smaller carbon footprint, such as dry reforming of methane (DRM), has been found to greatly improve the industry’s utilization of greenhouse gases (GHGs). In this study, we numerically modeled a DRM process in lab-scale packed and fluidized beds using the Eulerian–Lagrangian approach. The simulation results agree well with the available experimental data. Based on these validated models, we investigated the effects of temperature, inlet composition, and contact spatial time on DRM in packed beds. The impacts of the side effects on the DRM process were also examined, particularly the role the methane decomposition reaction plays in coke formation at high temperatures. It was found that the coking amount reached thermodynamic equilibrium after 900 K. Additionally, the conversion rate in the fluidized bed was found to be slightly greater than that in the packed bed under the initial fluidization regime, and less coking was observed in the fluidized bed. The simulation results show that the adopted CFD approach was reliable for modeling complex flow and reaction phenomena at different scales and regimes.Keywords
Funding Information
- Khalifa University (RC2-2018-024)
This publication has 61 references indexed in Scilit:
- Simulation of a Fluidized‐Bed Reactor for Dimethyl Ether SynthesisChemical Engineering & Technology, 2010
- Three-dimensional simulation of liquid injection, film formation and transport, in fluidized bedsParticuology, 2009
- Catalytic Technology for Carbon Dioxide Reforming of Methane to Synthesis GasChemCatChem, 2009
- Three fundamental granular flow experiments and CPFD predictionsPowder Technology, 2007
- Comparative study between fluidized bed and fixed bed reactors in methane reforming with CO2 and O2 to produce syngasEnergy Conversion and Management, 2006
- Novel Circulating Fluidized-Bed Membrane Reformer for the Efficient Production of Ultraclean Fuels from HydrocarbonsIndustrial & Engineering Chemistry Research, 2002
- Reaction kinetics of the CO2 reforming of methaneChemical Engineering & Technology, 1997
- The multiphase particle-in-cell (MP-PIC) method for dense particulate flowsInternational Journal of Multiphase Flow, 1996
- Carbon Dioxide Reforming of Methane To Produce Synthesis Gas over Metal-Supported Catalysts: State of the ArtEnergy & Fuels, 1996
- Behaviour of gas-fluidized beds of fine powders part I. Homogeneous expansionPowder Technology, 1980