The 1-D analysis of cool down simulation of vehicle HVAC system
Open Access
- 1 January 2021
- journal article
- research article
- Published by National Library of Serbia in Thermal Science
- Vol. 25 (3 Part A) , 1677-1687
Abstract
In this paper, a detailed combined 1-D model of HVAC systems of a vehicle were developed by using the LMS imagine LAB AMESIM software package. The numerical simulations were considered for soaking and cool down analysis under different environmental conditions. The thermal performance of different refrigerants as R-134a and R-1234yf were evaluated in terms of thermal performance and energy consumption. According to the soaking simulation results, the cabin air temperature values ranged from 49?C to 57?C in general. The maximum increase in cabin air temperature value was about 22?C obtained for 1000 W/m2 solar load. The total time until reaching the steady-state conditions for a target temperature value (23.5?C) was different for all simulations. The total time was calculated as 910 seconds for 1000 W/m2 solar load by using R-134a refrigerant loop. The results also showed that although the thermal performance of R-134a was slightly better, R-1234yf can be used due to its environmental properties with acceptable performance. The calculated COP values during cooldown analysis were ranged from 1.71 to 4.52 in general. The minimum value was obtained for the cases which had a maximum solar load and higher cabin interior temperature values. The calculated temperature data for soaking and cool down analysis were in good agreement with the reference data presented in this study. These numerical results are very important for reducing the thermal load of the vehicle cabin considering energy consumption of the HVAC system for different thermal conditions.Keywords
This publication has 11 references indexed in Scilit:
- Comparative Evaluation of an Automobile Air - Conditioning System Using R134a and Its Alternative RefrigerantsEnergy Procedia, 2017
- A comparative study on the performance of HFO-1234yf and HFC-134a as an alternative in automotive air conditioning systemsApplied Thermal Engineering, 2017
- Investigation of transient cooling of an automobile cabin with a virtual manikin under solar radiationThermal Science, 2013
- A brief performance comparison of R1234yf and R134a in a bench tester for automobile applicationsApplied Thermal Engineering, 2012
- Three dimensional numerical analysis of temperature distribution in an automobile cabinThermal Science, 2012
- The effects of using different type of inlet vents on the thermal characteristics of the automobile cabin and the human body during cooling periodThe International Journal of Advanced Manufacturing Technology, 2011
- Comparative performance of an automotive air conditioning system using fixed and variable capacity compressorsInternational Journal of Refrigeration, 2010
- Transient numerical analysis of airflow and heat transfer in a vehicle cabin during heating periodInternational Journal of Vehicle Design, 2010
- Evaluation of Heat Transfer Characteristics in an Automobile Cabin with a Virtual Manikin During Heating PeriodNumerical Heat Transfer, Part A: Applications, 2009
- Vehicle Paint Radiation Properties and Affect on Vehicle Soak Temperature, Climate Control System Load, and Fuel EconomySAE International Journal of Advances and Current Practices in Mobility, 2005