Parametric Optimization of Selective Laser Melted 13Ni400 Maraging Steel by Taguchi Method
Open Access
- 2 March 2024
- journal article
- research article
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 8 (2) , 52
Abstract
This study’s novel 13Ni400 maraging steel parts are additively manufactured through a selective laser melting process. The Taguchi approach is adopted to evaluate the combined influence of process variables (energy density), viz., laser power, layer thickness, hatch spacing, and scan speed, on responses like relative density, microhardness, surface roughness, and tensile strength. The powder and material characterization studies are conducted in terms of an optical microscope, scanning electron microscope (SEM), electron backscatter diffraction (EBSD), X-ray diffraction (XRD), and fractography analysis to explore the pre- and post-fabrication scenarios of the build parts. The consequences of energy density and process variables are studied through meticulous parametric studies. Finally, the optimum level of built parameters is identified and validated by a confirmative test predicting an average error of ~1.80%. This work is proficient in producing defect-free parts with maximum densification and improved mechanical properties for newly developed 13Ni-400 maraging steel by the selective laser melting (SLM) technique.Keywords
Funding Information
- Vellore Institute of Technology (SG20210144)
This publication has 49 references indexed in Scilit:
- Control of texture and microstructure in additive manufacturing of stainless steel 316 LJournal of Alloys and Compounds, 2023
- Spark plasma sintering of 13Ni-400 maraging steel: Enhancement of mechanical properties through surface modificationJournal of Alloys and Compounds, 2023
- Predictive models for an optimized fabrication of 18Ni300 maraging steel for moulding and tooling by Selective Laser MeltingJournal of Manufacturing Processes, 2021
- Effect of the as-built microstructure on the martensite to austenite transformation in a 18Ni maraging steel after laser-based powder bed fusionAdditive Manufacturing, 2021
- Optimization of mixed surfactants-based β-carotene nanoemulsions using response surface methodology: An ultrasonic homogenization approachFood Chemistry, 2018
- Tensile, fracture, and fatigue crack growth properties of a 3D printed maraging steel through selective laser meltingJournal of Alloys and Compounds, 2017
- Optimization of the canola oil based vitamin E nanoemulsions stabilized by food grade mixed surfactants using response surface methodologyFood Chemistry, 2015
- Effect of Cu on the evolution of precipitation in an Fe–Cr–Ni–Al–Ti maraging steelActa Materialia, 2010
- The effect of the addition of alloying elements on carbide precipitation and mechanical properties in 5% chromium martensitic steelsActa Materialia, 2007
- Effect of alloying on hardening of martensitic stainless steels of the Fe?Cr?Ni and Fe?Cr?Co systemsMetal Science and Heat Treatment, 1975