Efficiency of a Digital Particle Image Velocimetry (DPIV) Method for Monitoring the Surface Velocity of Hyper-Concentrated Flows
Open Access
- 19 October 2018
- journal article
- research article
- Published by MDPI AG in Geosciences
- Vol. 8 (10) , 383
Abstract
Digital particle image velocimetry records high resolution images and allows the identification of the position of points in different time instants. This paper explores the efficiency of the digital image-technique for remote monitoring of surface velocity and discharge measurement in hyper-concentrated flow by the way of laboratory experiment. One of the challenges in the application of the image-technique is the evaluation of the error in estimating surface velocity. The error quantification is complex because it depends on many factors characterizing either the experimental conditions or/and the processing algorithm. In the present work, attention is devoted to the estimation error due either to the acquisition time or to the size of the sub-images (interrogation areas) to be correlated. The analysis is conducted with the aid of data collected in a scale laboratory flume constructed at the Hydraulic laboratory of the Department of Civil, Environmental, Aerospace and of Materials Engineering (DICAM)—University of Palermo (Italy) and the image processing is carried out by the help of the PivLab algorithm in Matlab. The obtained results confirm that the number of frames used in processing procedure strongly affects the values of surface velocity; the estimation error decreases as the number of frames increases. The size of the interrogation area also exerts an important role in the flow velocity estimation. For the examined case, a reduction of the size of the interrogation area of one half compared to its original size has allowed us to obtain low values of the velocity estimation error. Results also demonstrate the ability of the digital image-technique to estimate the discharge at given cross-sections. The values of the discharge estimated by applying the digital image-technique downstream of the inflow sections by using the aforementioned size of the interrogation area compares well with those measured.Keywords
This publication has 37 references indexed in Scilit:
- Application of entropic approach to estimate the mean flow velocity and Manning roughness coefficient in a high-curvature flumeHydrology Research, 2016
- Entropic approach to estimate the mean flow velocity: experimental investigation in laboratory flumesEnvironmental Fluid Mechanics, 2015
- Hydrologic and topographic variability modulate channel change in mountain riversJournal of Hydrology, 2014
- Formulation of the Entropy Parameter Based on Hydraulic and Geometric Characteristics of River Cross SectionsJournal of Hydrologic Engineering, 2010
- Large‐scale particle image velocimetry for measurements in riverine environmentsWater Resources Research, 2008
- Application and evaluation of LS-PIV technique for the monitoring of river surface velocities in high flow conditionsFlow Measurement and Instrumentation, 2008
- Application of Acoustic Doppler Velocimeters for Streamflow MeasurementsJournal of Hydraulic Engineering, 2007
- Turbulence Measurements with Acoustic Doppler VelocimetersJournal of Hydraulic Engineering, 2005
- Defocusing digital particle image velocimetry: a 3-component 3-dimensional DPIV measurement technique. Application to bubbly flowsExperiments in Fluids, 2000
- Evaluation of the Acoustic Doppler Velocimeter (ADV) for Turbulence Measurements*Journal of Atmospheric and Oceanic Technology, 1998