A Portable ‘Plug-and-Play’ Fibre Optic Sensor for In-Situ Measurements of pH Values for Microfluidic Applications
Open Access
- 30 July 2022
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 13 (8) , 1224
Abstract
Microfluidics is used in many applications ranging from chemistry, medicine, biology and biomedical research, and the ability to measure pH values in-situ is an important parameter for creating and monitoring environments within a microfluidic chip for many such applications. We present a portable, optical fibre-based sensor for monitoring the pH based on the fluorescent intensity change of an acrylamidofluorescein dye, immobilized on the tip of a multimode optical fibre, and its performance is evaluated in-situ in a microfluidic channel. The sensor showed a sigmoid response over the pH range of 6.0–8.5, with a maximum sensitivity of 0.2/pH in the mid-range at pH 7.5. Following its evaluation, the sensor developed was used in a single microfluidic PDMS channel and its response was monitored for various flow rates within the channel. The results thus obtained showed that the sensor is sufficiently robust and well-suited to be used for measuring the pH value of the flowing liquid in the microchannel, allowing it to be used for a number of practical applications in ‘lab-on-a-chip’ applications where microfluidics are used. A key feature of the sensor is its simplicity and the ease of integrating the sensor with the microfluidic channel being probed.Keywords
Funding Information
- Worshipful Company of Scientific Instrument Makers
This publication has 70 references indexed in Scilit:
- Real-time optical pH measurement in a standard microfluidic cell culture systemBiomedical Optics Express, 2013
- Induced pH-dependent shift by local surface plasmon resonance in functionalized gold nanorodsDiscover Nano, 2013
- Rapid Antibiotic Susceptibility Testing in a Microfluidic pH SensorAnalytical Chemistry, 2013
- A highly fluorescent pH sensing membrane for the alkaline pH range incorporating a BODIPY dyeThe Analyst, 2012
- Automated system developed to control pH and concentration of nutrient solution evaluated in hydroponic lettuce productionComputers and Electronics in Agriculture, 2012
- Coloration and application of pH‐sensitive dyes on textile materialsColoration Technology, 2012
- Microfluidic-based biosensors toward point-of-care detection of nucleic acids and proteinsMicrofluidics and Nanofluidics, 2010
- Soil pH controls the environmental availability of phosphorus: Experimental and mechanistic modelling approachesApplied Geochemistry, 2009
- Fabrication and characterization of pH sensor based on side polished single mode optical fiberOptics Communications, 2003
- Intramolecular fluorescence self-quenching of fluoresceinamineJournal of the American Chemical Society, 1990