Developing a Novel Design for a Tubular Solid Oxide Fuel Cell Current Collector
Open Access
- 13 June 2022
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 12 (12) , 6003
Abstract
This study presents a novel current collector design for a tubular SOFC and numerically investigates its performance. The new current collector design has a flow channel with a trapezoidal shape. Several channels, such as four, eight, and twelve, are investigated, and their effects on cell performance are reported and compared. Additionally, a traditional tubular SOFC and the newly developed design are presented. The equations of mass conservation, momentum, charge transport, and energy were considered in the numerical model, and the ANSYS Fluent SOFC module was used to solve the numerical model. The results show that the developed design performed better than the traditional design. The new design with twelve channels collected 0.384 A, higher than the other designs. Although the design with twelve channels gave a high concentration of hydrogen at the outlet compared to the designs with four and eight channels, it gave higher performance than the designs with four and eight channels. Increasing the number of channels in the developed design enhanced the cell performance significantly due to the increased contact area, leading to the efficient collection of the generated current.Keywords
Funding Information
- King Abdulaziz University (G: 1500-135-1440)
This publication has 38 references indexed in Scilit:
- Three-dimensional computational fluid dynamics modeling of anode-supported planar SOFCInternational Journal of Hydrogen Energy, 2011
- Thermal stress and probability of failure analyses of functionally graded solid oxide fuel cellsJournal of Power Sources, 2010
- CFD-Based Design of Microtubular Solid Oxide Fuel CellsJournal of Heat Transfer, 2010
- Cathode materials for solid oxide fuel cells: a reviewJournal of Solid State Electrochemistry, 2009
- Fabrication and characterization of an anode-supported hollow fiber SOFCJournal of Power Sources, 2009
- Development of a 700W anode-supported micro-tubular SOFC stack for APU applicationsInternational Journal of Hydrogen Energy, 2008
- Comparison of different current collecting modes of anode supported micro-tubular SOFC through mathematical modelingJournal of Power Sources, 2007
- Functionally graded composite cathodes for solid oxide fuel cellsJournal of Power Sources, 2002
- Electrochemical properties of Ni–YSZ cermet in solid oxide fuel cells Effect of current collectingSolid State Ionics, 2000
- Cathode current-collectors for a novel tubular SOFC designJournal of Power Sources, 1998