Pollutant in palm oil production process
Open Access
- 13 December 2013
- journal article
- research article
- Published by Taylor & Francis in Journal of the Air & Waste Management Association
- Vol. 65 (7) , 773-781
Abstract
Palm oil mill effluent (POME) is a by-product of the palm industry and it releases large amounts of greenhouse gases (GHGs). Water systems are also contaminated by POME if it is released into nonstandard ponds or rivers where it endangers the lives of fish and water fowl. In this paper, the environmental bottlenecks faced by palm oil production were investigated by analyzing the data collected from wet extraction palm oil mills (POMs) located in Malaysia. Strategies for reducing pollution and technologies for GHG reduction from the wet extraction POMs were also proposed. Average GHG emissions produced from processing 1 ton of crude palm oil (CPO) was 1100 kg CO2eq. This amount can be reduced to 200 kg CO2eq by capturing biogases. The amount of GHG emissions from open ponds could be decreased from 225 to 25 kg CO2eq/MT CPO by covering the ponds. Installation of biogas capturing system can decrease the average of chemical oxygen demand (COD) to about 17,100 mg/L and stabilizing ponds in the final step could decrease COD to 5220 mg/L. Using a biogas capturing system allows for the reduction of COD by 80% and simultaneously using a biogas capturing system and by stabilizing ponds can mitigate COD by 96%. Other ways to reduce the pollution caused by POME, including the installation of wet scrubber vessels and increasing the performance of biogas recovery and biogas upgrading systems, are studied in this paper. Implications: Around 0.87 m3 POME is produced per 1 ton palm fruit milled. POME consists of around 2% oil, 2–4% suspended solid, 94–96% water. In palm oil mills, more than 90% of GHGs were emitted from POME. From 1 ton crude palm oil, 1100 kg CO2eq GHGs are generated, which can be reduced to 200 kg CO2eq by installation of biogas capturing equipment.Keywords
This publication has 40 references indexed in Scilit:
- Benefits of clean development mechanism application on the life cycle assessment perspective: A case study in the palm oil industryJournal of the Air & Waste Management Association, 2012
- Role of calcium oxide in sludge granulation and methanogenesis for the treatment of palm oil mill effluent using UASB reactorJournal of Hazardous Materials, 2011
- Financial appraisal of wet mesophilic AD technology as a renewable energy and waste management technologyScience of The Total Environment, 2011
- Improved biogas production from palm oil mill effluent by a scaled-down anaerobic treatment processWorld Journal of Microbiology and Biotechnology, 2009
- Sustainability of Palm Oil Industries: An Innovative Treatment via Membrane TechnologyJournal of Applied Sciences, 2009
- Biofuels: Environment, technology and food securityRenewable and Sustainable Energy Reviews, 2009
- Production of biogas from municipal solid waste with domestic sewageJournal of Hazardous Materials, 2007
- Residual oil and suspended solid removal using natural adsorbents chitosan, bentonite and activated carbon: A comparative studyChemical Engineering Journal, 2005
- Study of Dictamnus gymnostylis Volatiles and Plausible Explanation of the “Burning Bush” PhenomenonJournal of Essential Oil Research, 2004
- The Swedish program for investigations concerning biofuelsScience of The Total Environment, 1999