Results of a European dose survey for mammography
- 18 February 2008
- journal article
- research article
- Published by Oxford University Press (OUP) in Radiation Protection Dosimetry
- Vol. 129 (1-3) , 199-203
Abstract
For the dose study, a semi-automated method of data collection is used in this study. The participating centres were asked to fill out a spreadsheet with all necessary data and return it. For direct digital (DR) systems, the relevant data available in the DICOM header were used. All data is automatically added to a database and processed. The data were used to calculate the mean glandular dose for every image and for different thicknesses of polymethyl methacrylate phantoms using available conversion factors. Second-degree polynomials were fitted to the patient dose data and a reference dose curve was constructed for a range of thicknesses instead of a dose reference level at a single point. The dose reference curve rises from 1.57 mGy for a thickness of 30 mm to 2.50 mGy for 55 mm and 3.83 mGy for 75 mm. The results show centres that exceed this curve lie only in the lower or higher range of thicknesses and would remain undetected using a dose reference value in a single point. This gives better information to radiographers on where there is room for improvement of the dose levels in their system.Keywords
This publication has 4 references indexed in Scilit:
- Towards a proposition of a diagnostic (dose) reference level for mammographic acquisitions in breast screening measurements in BelgiumRadiation Protection Dosimetry, 2005
- Patient dose in digital mammographyMedical Physics, 2004
- A parametric method for determining mammographic X‐ray tube output and half value layerBritish Journal of Radiology, 2001
- Additional factors for the estimation of mean glandular breast dose using the UK mammography dosimetry protocolPhysics in Medicine & Biology, 2000