Effects of nickel shell microcapsules and short fibers on polyamide 6‐matrix composites: Thermal, surface wetting, mechanical, and tribological properties
- 31 May 2022
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 43 (10) , 7074-7085
Abstract
The excellent lubricating properties of microcapsules have been well recognized in modified polymers though very few reports have mentioned the practical application for engineering parts. In this study, different short fibers and nickel shell microcapsules (NMS) synergistically modify PA6 and injection molded to prepare bearings. With 10 wt% NMS, the COF could be reduced from 0.45 to 0.1. Fibers can effectively overcome bearing failure resulting from crushing the matrix under high loads or rapid peeling wear at high swing frequencies, which can warrant the effective lubrication of NMS and the formation of high‐quality transfer film. The bearing long‐life test shows very stable and low COF and wear with the feasibility to utilize microcapsules modified polymers in journal bearings.Keywords
Funding Information
- National Defense Basic Scientific Research Program of China (JCKY2019407D002)
This publication has 51 references indexed in Scilit:
- Tensile and thermomechanical properties of short carbon fiber reinforced polyamide 6 compositesComposites Part B: Engineering, 2013
- Fibre reinforced nanocomposites: Mechanical properties of PA6/clay and glass fibre/PA6/clay nanocompositesPolymer, 2010
- Friction and wear properties of PTFE composites filled with PA6Polymer Composites, 2009
- Imparting Ultra‐Low Friction and Wear Rate to Epoxy by the Incorporation of Microencapsulated Lubricant?Macromolecular Materials and Engineering, 2009
- Effects of carbon nanofibers on crystalline structures and properties of ultrahigh molecular weight polyethylene blend fabricated using twin‐screw extrusionJournal of Applied Polymer Science, 2007
- Dynamic mechanical and thermal properties of MAPE treated jute/HDPE compositesComposites Science and Technology, 2006
- Low-friction wear-resistant coatings for high-temperature foil bearingsTribology International, 2005
- Friction and wear behavior of three-dimensional braided carbon fiber/epoxy composites under lubricated sliding conditionsJournal of Materials Science, 2005
- Tribological mechanism and property of 9Cr18 friction pair at atmosphere and in vacuumVacuum, 2004
- Improvement of frictional properties and abrasive wear resistance of nylon/graphite composite by oil impregnationWear, 2003