Detection of High-Strength Bolts Looseness Using Lead Zirconate Titanate Due to Wavelet Packet Analysis
- 15 November 2018
- conference paper
- Published by American Society of Civil Engineers (ASCE)
- p. 1069-1077
Abstract
High-strength bolts as connection members are widely used in steel bridge due to its advantages of simple construction, easy maintenance, and replacement. But during their service, the high-strength bolts are prone to looseness damages since bumpiness of vehicles and corrosion environment. If high-strength bolts looseness damages fail to be discovered in time, it will not only affect the overall stability of the bridge, and even affect the safety of the bridge structure. Therefore, it is very critical to develop an efficient and reliable high-strength bolts loosening damage monitoring methodology. An active high-strength bolts looseness damage monitoring approach based on stress wave propagation method using lead zirconate tinanate (PZT) is proposed. In this research, two steel specimens were investigated. There were two PZT transducers at each steel specimen as actuator and sensor. In each specimen, three high performance steel sheets were connected by six high-strength bolts. The test results showed that an active sensing approach based on PZT using wavelet packet energy analysis can detect successfully the bolt looseness damage. During the process of the bolts looseness, the amplitude of signal received by PZT sensors continuously decreases in the time-domain signal. The research results present the high-strength bolts looseness damage can affect the propagation path of stress wave and reduce the signal received by sensor.Keywords
This publication has 10 references indexed in Scilit:
- Detection of Debonding Between Fiber Reinforced Polymer Bar and Concrete Structure Using Piezoceramic Transducers and Wavelet Packet AnalysisIEEE Sensors Journal, 2017
- A Comparative Study of the Very Early Age Cement Hydration Monitoring Using Compressive and Shear Mode Smart AggregatesIEEE Sensors Journal, 2016
- Monitoring of Grouting Compactness in a Post-Tensioning Tendon Duct Using Piezoceramic TransducersSensors, 2016
- Active Debonding Detection for Large Rectangular CFSTs Based on Wavelet Packet Energy Spectrum with PiezoceramicsJournal of Structural Engineering, 2013
- Structural health monitoring of bolted joints using linear and nonlinear acoustic/ultrasound methodsStructural Health Monitoring, 2011
- Measurement of axial stress using mode-converted ultrasoundNDT & E International, 2009
- An overheight vehicle–bridge collision monitoring system using piezoelectric transducersSmart Materials and Structures, 2007
- Estimation of clamping force in high-tension bolts through ultrasonic velocity measurementUltrasonics, 2006
- Identification of the Location and Level of Damage in Multiple-Bolted-Joint Structures by PZT Actuator-SensorsJournal of Structural Engineering, 2006
- Feasibility of using impedance‐based damage assessment for pipeline structuresEarthquake Engineering & Structural Dynamics, 2001