Numerical optimization of hole making in GFRP composite using abrasive water jet machining process
- 29 September 2014
- journal article
- research article
- Published by Taylor & Francis in Journal of the Chinese Institute of Engineers
- Vol. 38 (1) , 66-76
Abstract
Machining of composite materials for the production of bolt holes is essential in the assembly of the structural frames in many industrial applications of glass fiber-reinforced plastic (GFRP). Abrasive water jet cutting technology has been used in industry for such purposes. This technology has procured many overlapping applications and as the life of the joint in the assembled structure can be critically affected by the quality of the holes, so it is important for the industry to understand the application of the abrasive water jet cutting process on GFRP composite materials. The aim of the present work is to assess the influence of abrasive water jet machining parameters on the hole making process of woven-laminated GFRP material and to find the optimum values of the process parameters. Statistical approach was used to understand the effects of the predicted variables on the response variables. Analysis of variance was performed to isolate the effects of the parameters affecting the hole making in abrasive water jet cutting. The results show that the optimum values of cutting feed, fiber density, water jet pressure, standoff distance, and abrasive flow rate upon the response variables are 0.3 m/min, 0.82 g/cm3, 150 MPa, 2 mm, and 100 g/min, respectively.Keywords
This publication has 10 references indexed in Scilit:
- A study of abrasive water jet machining process on glass/epoxy composite laminateJournal of Materials Processing Technology, 2009
- An investigation on kerf characteristics in abrasive waterjet cutting of layered compositesJournal of Materials Processing Technology, 2009
- Drilling of fiber reinforced plastics: A reviewJournal of Materials Processing Technology, 2007
- The path towards delamination-free drilling of composite materialsJournal of Materials Processing Technology, 2005
- Study of cutting fiber-reinforced composites by using abrasive water-jet with cutting head oscillationComposite Structures, 2002
- Machining of Composite MaterialsCIRP Annals, 2002
- Abrasive Waterjet Machining of Polymer Matrix Composites – Cutting Performance, Erosive Process and Predictive ModelsThe International Journal of Advanced Manufacturing Technology, 1999
- Drilling of Graphite/Bismaleimide Composite MaterialJournal of Materials Engineering and Performance, 1999
- A failure analysis of water jet drilling in composite laminatesInternational Journal of Machine Tools and Manufacture, 1990
- Simultaneous Optimization of Several Response VariablesJournal of Quality Technology, 1980