Abstract
The article presents the results of experimental studies of determining the strength of normal adhesion (with axial tension) in a masonry of cellular concrete blocks of autoclave hardening of classes of compressive strength B1.5 ÷ B3.5 in various cement and polymer-cement mortars. The tests were carried out in the Laboratory of the Department of «Reinforced Concrete and Stone Structures» of Moscow State University of Civil Engineering on experimental samples consisting of two cubes 150x150x150 mm in size, sawn from aerated concrete blocks and bonded (glued) to each other using masonry mortars. The analysis of the research results is carried out and the value of the percentage increase in the normal adhesion in the masonry is determined when polymer cement compositions are used in the masonry joints instead of cement masonry mortars.