Development of an 8-T Conduction—Cooled Superconducting Magnet With 300-mm Warm Bore for Material Processing Application
Authors:
- 9 January 2014
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 24 (2) , 72-76
Abstract
A wide-bore conduction-cooled superconducting magnet was designed, fabricated, and tested for material processing applications. The superconducting magnet has a large clear warm bore of Ø300 mm, the maximum center field of 8 T, the homogeneity of 97% in homogeneous regions of Ø300 mm × 50 mm. The magnet is composed of three coaxial coils made with NbTi low-temperature superconducting wires. All the coils were connected in series and will be operated with a current of 82.2 A with a high level of stored energy, i.e., about 2.13 MJ. A passive protection based on a subdivided scheme is adopted to protect the magnet from damage caused by a quench. Two two-stage GM cryocoolers with the second-stage cooling power of 1.5 W is used to cool the superconducting magnet from room temperature to 4.2 K. In this paper, magnetic design, stress and strain analysis, quench protection, fabrication, and test are presented.Keywords
This publication has 7 references indexed in Scilit:
- Quench Protection Design of a 1.5 T Superconducting MRI MagnetIEEE Transactions on Applied Superconductivity, 2011
- Development of a Novel Hybrid Protection System for Superconducting MRI MagnetsIEEE Transactions on Applied Superconductivity, 2011
- Practical Application of Gas-Gap Thermal Switch in Conduction Cooled Superconducting Magnet SystemIEEE Transactions on Applied Superconductivity, 2011
- An 8 T Superconducting Split Magnet System With Large Crossing Warm BoreIEEE Transactions on Applied Superconductivity, 2010
- Development Trends in High Field Magnet TechnologyIEEE Transactions on Applied Superconductivity, 2008
- Development of Wide-Bore Conduction-Cooled Superconducting Magnet System for Material Processing ApplicationsIEEE Transactions on Applied Superconductivity, 2004
- Uses of intense d.c. magnetic fields in materials processingMaterials Science and Engineering: A, 2000