Monotonic and Fatigue Behavior of EBM Manufactured Ti-6Al-4V Solid Samples: Experimental, Analytical and Numerical Investigations
Open Access
Abstract
The present study aims to carry out an experimental, analytical and numerical investigation of the monotonic and fatigue performance of electron beam melted Ti-6Al-4V structures. Therefore, tensile tests, multiple step tests and strain-life tests were performed on machined EBM Ti-6Al-4V solid samples. An elastic-plastic material model in combination with a numerical damage model was examined according to the experimental tensile tests. Analytical models proposed by Ramberg and Osgood, as well as Coffin and Manson were obtained to describe the cyclic stress-strain curves and strain-life curves, respectively. The fracture surfaces of the tested samples and the influence of different build directions were analyzed. A prediction of the static and fatigue material properties is of particular importance, e.g., for the safe application of additively manufactured load-bearing implant structures. Based on the determined analytical and numerical models, the material and product behavior of complex electron beam melted structures under cyclic loading and fatigue life determination can be investigated in the early stages of the product development process.Keywords
Funding Information
- Deutsche Forschungsgemeinschaft (SFB 1270/1 – 299150580)
This publication has 37 references indexed in Scilit:
- The Influence of As-Built Surface Conditions on Mechanical Properties of Ti-6Al-4V Additively Manufactured by Selective Electron Beam MeltingJOM, 2016
- Process window for electron beam melting of Ti-6Al-4VPowder Metallurgy, 2015
- Evaluation of Orientation Dependence of Fracture Toughness and Fatigue Crack Propagation Behavior of As-Deposited ARCAM EBM Ti-6Al-4VJOM, 2015
- Electron Beam Additive Manufacturing of Titanium Components: Properties and PerformanceJournal of Manufacturing Science and Engineering, 2013
- Microstructures and Mechanical Properties of Ti6Al4V Parts Fabricated by Selective Laser Melting and Electron Beam MeltingJournal of Materials Engineering and Performance, 2013
- Effects of processing on microstructure and mechanical properties of a titanium alloy (Ti–6Al–4V) fabricated using electron beam melting (EBM), Part 2: Energy input, orientation, and locationMaterials Science and Engineering: A, 2013
- Titanium foams for biomedical applications: a reviewMaterials Technology, 2010
- Numerical and experimental study of dry cutting for an aeronautic aluminium alloy (A2024-T351)International Journal of Machine Tools and Manufacture, 2008
- Fatigue: A complex subject—Some simple approximationsExperimental Mechanics, 1965
- Cyclic Plastic Strain Energy and Fatigue of Metals1965