Substrate Integrated Waveguide (SIW)-Based Wireless Temperature Sensor for Harsh Environments
Open Access
Abstract
This paper presents a new wireless sensor structure based on a substrate integrated circular waveguide (SICW) for the temperature test in harsh environments. The sensor substrate material is 99% alumina ceramic, and the SICW structure is composed of upper and lower metal plates and a series of metal cylindrical sidewall vias. A rectangular aperture antenna integrated on the surface of the SICW resonator is used for electromagnetic wave transmission between the sensor and the external antenna. The resonant frequency of the temperature sensor decreases when the temperature increases, because the relative permittivity of the alumina ceramic increases with temperature. The temperature sensor presented in this paper was tested four times at a range of 30–1200 °C, and a broad band coplanar waveguide (CPW)-fed antenna was used as an interrogation antenna during the test process. The resonant frequency changed from 2.371 to 2.141 GHz as the temperature varied from 30 to 1200 °C, leading to a sensitivity of 0.197 MHz/°C. The quality factor of the sensor changed from 3444.6 to 35.028 when the temperature varied from 30 to 1000 °C.Keywords
This publication has 28 references indexed in Scilit:
- Wireless passive high-temperature sensor based on multifunctional reflective patch antenna up to 1050 degrees centigradeSensors and Actuators A: Physical, 2015
- Wireless Passive Temperature Sensors Using Integrated Cylindrical Resonator/Antenna for Harsh-Environment ApplicationsIEEE Sensors Journal, 2014
- High-Q and miniaturized complementary split ring resonator-loaded substrate integrated waveguide microwave sensor for crack detection in metallic materialsSensors and Actuators A: Physical, 2014
- A Harsh Environment-Oriented Wireless Passive Temperature Sensor Realized by LTCC TechnologySensors, 2014
- GaN/Si based single SAW resonator temperature sensor operating in the GHz frequency rangeSensors and Actuators A: Physical, 2014
- Measurement of relative permittivity of LTCC ceramic at different temperaturesAIP Advances, 2014
- Design and fabrication of SAW pressure, temperature and impedance sensors using novel multiphysics simulation modelsSensors and Actuators A: Physical, 2013
- Review of substrate-integrated waveguide circuits and antennasIET Microwaves, Antennas & Propagation, 2011
- Monitoring of the temperature inside a lining of a metallurgical vessel using a SAW temperature sensorProcedia Chemistry, 2009
- Single-substrate integration technique of planar circuits and waveguide filtersIEEE Transactions on Microwave Theory and Techniques, 2003