Determination of J‐integral R‐curves for Hastelloy X and inconel 617 up to 1223 K using the potential drop technique

Authors:
Publisher website
Google Scholar
Abstract
For Hastelloy X (T = 308 K and T = 1223 K) and for Inconel 617 (T = 308 K, 473 K, 673 K, 873 K, 973 K, 998 K, 1023 K, 1048 K, 1073 K, 1173 K, and 1223 K) the J‐integral R‐curves have been determined. For Hastelloy X at 308 K the multispecimen technique has been compared with the single specimen method using the potential drop technique. At 1223 K Hastelloy X delivered a low J0‐integral value. Inconel 617 showed a smooth increase in J0with increasing temperature, up to 998 K; above this temperature even for large loadline displacements only blunting behaviour has been observed. The same tendency has been found for the evaluation of the tearing modulus. With increasing temperature the tearing modulus increases. In the temperature range from 998 K to 1223 K the tearing modulus increases by about one order of magnitude. For both alloys the onset of stable crack growth in most cases is earlier than the load maximum is reached in the load versus load‐line displacement curves.

This publication has 18 references indexed in Scilit: