Numerical simulation and thermal stress analysis of direct internal reforming SOFCs
Authors:
- 10 July 2021
- journal article
- research article
- Published by Taylor & Francis in International Journal of Green Energy
- Vol. 19 (4) , 399-409
Abstract
Hydrocarbon fuels such as CH4 can be converted into H2 and CO by direct internal reforming (DIR) processes within the anode of solid oxide fuel cells (SOFCs). DIR-SOFCs can reduce system complexity and capital cost due to the elimination of external reformers. However, the strong endothermic reforming reactions at the cell entrance may result in large thermal stress, leading to premature failure. In this study, a numerical simulation study was carried out to analyze the effect of operating conditions and cell structures on temperature, composition and thermal stress distributions in DIR-SOFCs. A two-dimensional axisymmetric model was developed by considering the coupling effects of the chemical/electrochemical reactions; transport processes of mass, charge, or heat; and thermal mechanical stress. The failure probability of the cell was estimated by stress distributions. Simulation results show that the increase of the steam-to-carbon ratio and operating voltage leads to higher thermal stresses and higher failure probability. The introduction of a metal supportive layer may release the thermal stress problem at severe DIR-SOFC operation conditions, which leads to a flatter temperature distribution and smaller failure probability compared to anode-supported SOFCs.Keywords
Funding Information
- National Natural Science Foundation of China
- Natural Science Foundation of China (51806017)
This publication has 34 references indexed in Scilit:
- Performance degradation prediction of direct internal reforming solid oxide fuel cell due to Ni-particle coarsening in composite anodeEnergy Conversion and Management, 2021
- Solid oxide fuel cell: Materials for anode, cathode and electrolyteInternational Journal of Hydrogen Energy, 2020
- 2D Simulation for CH4 Internal Reforming-SOFCs: An Approach to Study Performance Degradation and OptimizationEnergies, 2020
- Ethanol internal reforming in solid oxide fuel cells: A path toward high performance metal-supported cells for vehicular applicationsJournal of Power Sources, 2020
- Analyzing different planar biogas-fueled SOFC stack designs and their effects on the flow uniformityEnergy, 2020
- Three-dimensional micro/macroscale simulation of planar, anode-supported, intermediate-temperature solid oxide fuel cells: I. Model development for hydrogen fueled operationInternational Journal of Hydrogen Energy, 2019
- A numerical analysis of unsteady transport phenomena in a Direct Internal Reforming Solid Oxide Fuel CellInternational Journal of Heat and Mass Transfer, 2019
- Performance and environmental study of a biogas-fuelled solid oxide fuel cell with different reforming approachesEnergy, 2018
- Comprehensive review of methane conversion in solid oxide fuel cells: Prospects for efficient electricity generation from natural gasProgress in Energy and Combustion Science, 2016
- Thermodynamic modeling of direct internal reforming solid oxide fuel cells operating with syngasInternational Journal of Hydrogen Energy, 2007