Acoustic Emission for Evaluating the Reinforcement Effectiveness in Steel Fiber Reinforced Concrete
Open Access
- 24 April 2021
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 11 (9) , 3850
Abstract
Steel fiber reinforcement in concrete strongly enhances its ductility and toughness. This is basically due to the additional fracture mechanisms and energy used to overcome the interlocking and adhesion between the fibers and the cementitious matrix. The enhancement of the final properties is measured by mechanical tests and can be assessed only at the end of loading. These processes can be targeted and monitored by acoustic emission (AE) indices offering real-time characterization of the material’s performance much earlier than the final failure or the termination of loading. In this study, steel fiber reinforced concrete (SFRC) beams were tested in bending with simultaneous AE monitoring. Tests conducted independently in different laboratories confirm that the AE behavior at low load levels is very indicative of the amount of reinforcement and consequently, of the final mechanical properties. The reason is that the reinforcement phase is activated through shear stresses in its interphase, a mechanism that is more profound in the presence of higher fiber content, and correspondingly is absent in plain unreinforced material. This finding opens the way to characterize the effectiveness of reinforcement with just a proof loading at less than 30% of the final load bearing capacity.Keywords
This publication has 30 references indexed in Scilit:
- A Crack Characterization Method for Reinforced Concrete Beams Using an Acoustic Emission TechniqueApplied Sciences, 2020
- Nondestructive Monitoring Techniques for Crack Detection and Localization in RC ElementsApplied Sciences, 2020
- Identifying CFRP strip width influence on fracture of RC beams by acoustic emissionConstruction and Building Materials, 2018
- Acoustic source localization in an anisotropic plate without knowing its material properties – A new approachUltrasonics, 2017
- A novel multi-segment path analysis based on a heterogeneous velocity model for the localization of acoustic emission sources in complex propagation mediaUltrasonics, 2017
- Correlation of Plastic Strain Energy and Acoustic Emission Energy in Reinforced Concrete StructuresApplied Sciences, 2016
- Monitoring of the mechanical behavior of concrete with chemically treated steel fibers by acoustic emissionConstruction and Building Materials, 2013
- A probabilistic approach for damage identification and crack mode classification in reinforced concrete structuresJournal of Intelligent Material Systems and Structures, 2013
- Damage monitoring in fibre reinforced mortar by combined digital image correlation and acoustic emissionConstruction and Building Materials, 2013
- Recommendation of RILEM TC 212-ACD: acoustic emission and related NDE techniques for crack detection and damage evaluation in concrete*Materials and Structures, 2010