Improved Atmospheric Corrosion Testing for Aluminum Alloys, Part I: Deconstructing ASTM G85-A2
Authors:
- 14 November 2019
- journal article
- conference paper
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 76 (1) , 39-50
Abstract
In this work, the testing environment generated during ASTM G85-A2 exposure was deconstructed for two different commercial salt spray chambers. It was found that relative humidity (RH) control was critical to obtaining consistent results among different salt spray chamber designs, and seemingly small differences in chamber operation could have a significant impact on RH and associated corrosion damage. When RH was too high during the dwell period of the wet-dry cycle, rinsing of the sample prevented the accumulation of corrosion products along grain boundaries, which was necessary for exfoliation formation. When RH during the dwell period was too low, local anodes stifled during the dry air purge and corrosion rate was very low for most of the repeating 6 hour cycle. This work was the first in a two part study.Keywords
This publication has 25 references indexed in Scilit:
- Investigation on dual corrosion performance of magnesium-rich primer for aluminum alloys under salt spray test (ASTM B117) and natural exposureCorrosion Science, 2010
- Computational Modeling of Bounding Conditions for Pit Size on Stainless Steel in Atmospheric EnvironmentsJournal of the Electrochemical Society, 2010
- Effects of Sodium Chloride Particles, Ozone, UV, and Relative Humidity on Atmospheric Corrosion of SilverJournal of the Electrochemical Society, 2010
- Calculations of the Cathodic Current Delivery Capacity and Stability of Crevice Corrosion under Atmospheric EnvironmentsJournal of the Electrochemical Society, 2008
- Scanning Kelvin Probe Force MicroscopyJournal of the Electrochemical Society, 2004
- Accelerated corrosion tests for aerospace materials: current limitations and future trendsAircraft Engineering and Aerospace Technology, 1999
- The influence of grain structure and intergranularcorrosion rate on exfoliation and stress corrosion crackingof high strength Al–Cu–Mg alloysCorrosion Science, 1999
- Exfoliation and related microstructures in 2024 aluminum body skins on aging aircraftMaterials Characterization, 1997
- On the fracture toughness of aluminum-lithium alloy 2090-T8E41 at ambient and cryogenic temperaturesScripta Metallurgica, 1988
- On the Kinetics of the Breakdown of Passivity of Preanodized Aluminum by Chloride IonsJournal of the Electrochemical Society, 1975