Linearized Resolver
- 1 May 2018
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1191-1196
Abstract
Resolvers are used in position estimation systems. These electromagnetic sensors, take the benefits of electrical machines. In comparison with encoders, they are robust and more reliable. However, their accuracy is questioned when one of the output voltages is in the peak position. In these situation the other signal is about zero. Therefore, the rate of signal to noise is too low and more susceptible to be affected from environmental disturbances. To overcome this inefficiency, a new winding scheme is suggested in this paper. The proposed winding arrangement that is carried out on a disk type variable reluctance resolver has its own merits: compact size, fault tolerate capability, high accuracy and easy to manufacture. Finite element analysis verify the analytical expressions. Finally, a prototype of proposed resolver is fabricated. Both the finite element analysis and experimental results confirms the excellence of new winding configuration over the custom one.Keywords
This publication has 13 references indexed in Scilit:
- Performance Analysis of Concentrated Wound-Rotor Resolver for Its Applications in High Pole Number Permanent Magnet MotorsIEEE Sensors Journal, 2017
- Twelve‐slot two‐saliency variable reluctance resolver with non‐overlapping signal windings and axial flux excitationIET Electric Power Applications, 2017
- Design oriented technique for mitigating position error due to shaft run‐out in sinusoidal‐rotor variable reluctance resolversIET Electric Power Applications, 2017
- Effects of Physical Parameters on the Accuracy of Axial Flux ResolversIEEE Transactions on Magnetics, 2016
- A Novel Variable Reluctance Resolver for HEV/EV ApplicationsIEEE Transactions on Industry Applications, 2016
- A Novel Design of Rotor Contour for Variable Reluctance Resolver by Injecting Auxiliary Air-Gap Permeance HarmonicsIEEE Transactions on Energy Conversion, 2015
- Proposal of Improved Winding Method for VR ResolverIEEE Transactions on Magnetics, 2015
- A Novel Design Method for Resolver-to-Digital ConversionIEEE Transactions on Industrial Electronics, 2014
- Software-Based Resolver-to-Digital Converter for DSP-Based Drives Using an Improved Angle-Tracking ObserverIEEE Transactions on Instrumentation and Measurement, 2012
- Compensation of Amplitude Imbalance and Imperfect Quadrature in Resolver Signals for PMSM DrivesIEEE Transactions on Industry Applications, 2010