Shrinkage and Mitigation Strategies to Improve the Dimensional Stability of CaO-FeOx-Al2O3-SiO2 Inorganic Polymers
Open Access
Abstract
Volumetric stability is an important aspect of the performance of building materials, and the shrinkage of CaO-FeOx-Al2O3-SiO2-rich inorganic polymers (IPs) has not been thoroughly investigated yet. Hence, this paper describes the outcome of a study conducted to investigate ways to minimize their shrinkage using different curing regimes. Two different slags were used as case studies to assess the robustness of the developed mitigation strategies. IP pastes and mortars were cured at (i) room condition, (ii) in slightly elevated temperature (60 °C for 2 d) and (iii) in a water-saturated environment. The reaction kinetics and formed products were examined on IP pastes, while mortars were made to characterize the 28 d pore structure, autogenous shrinkage, drying shrinkage, and strength development. The results showed that the precursors’ reactivity and curing conditions severely affect shrinkage mechanisms and magnitude. Volumetric changes in the plastic stage can be related to the precursors’ reactivity but drying shrinkage was the driving mechanism affecting the volumetric stability of all IP mortars. Understanding the effect of a precursor’s composition and curing conditions on shrinkage is fundamental to develop proper mitigation strategies and to overcome one of IPs’ main technical drawbacks.Keywords
Funding Information
- H2020 Marie Skłodowska-Curie Actions (721185)
This publication has 44 references indexed in Scilit:
- The origin of early age expansions induced in cementitious materials containing shrinkage reducing admixturesCement and Concrete Research, 2011
- Early-age autogenous cracking of cementitious matrices: physico-chemical analysis and micro/macro investigationsMaterials and Structures, 2010
- Effect of shrinkage-reducing admixtures on the properties of alkali-activated slag mortars and pastesCement and Concrete Research, 2007
- Reaction mechanisms in the geopolymeric conversion of inorganic waste to useful productsJournal of Hazardous Materials, 2007
- A new approach to determine and quantify structural units in silicate glasses using micro-reflectance Fourier-Transform infrared spectroscopyAmerican Mineralogist: Journal of Earth and Planetary Materials, 2006
- The effect of composition and temperature on the properties of fly ash- and kaolinite-based geopolymersChemical Engineering Journal, 2002
- Effect of pore size distribution on drying shrinking of alkali-activated slag concreteCement and Concrete Research, 2000
- Effect of elevated temperature curing on properties of alkali-activated slag concreteCement and Concrete Research, 1999
- Kinetic aspects of basaltic glass dissolution at 90°C: role of aqueous silicon and aluminiumChemical Geology, 1997
- Determination of Several Valences of Iron, Arsenic and Antimony, and Selenium in GlassJournal of the American Ceramic Society, 1958