An Experimental Study of the Uniaxial Failure Behaviour of Rock‐Coal Composite Samples with Pre‐existing Cracks in the Coal
Open Access
- 1 January 2019
- journal article
- research article
- Published by Wiley in Advances in Civil Engineering
- Vol. 2019 (1)
Abstract
Many hazards encountered during coal mining can be caused by the instability and failure of the composite structure of the coal seam and the surrounding rock strata. The defects present in the coal affect the structural stability of the composite structure. In this study, uniaxial compression tests were conducted on sandstone‐coal composite samples with pre‐existing cracks in the coal, combined with tests performed with an acoustic emission (AE) device and a digital video camera. The strength, macrofailure initiation (MFI), and failure characteristics of composite samples, as influenced by the coal’s pre‐existing cracks, were analysed. The coal’s pre‐existing cracks were shown to reduce the strength, promote the occurrence of MFI, and affect the failure characteristics of the samples. Vertical penetration cracks had much more pronounced effects on strength and MFI occurrence, especially vertical penetration cracks that penetrated through the centre of the coal. Horizontal penetration cracks had a much reduced effect on strength and MFI occurrence. The MFI caused a step shape in the stress‐strain curve accompanied with a peak energy index signal and occurred around the original coal cracks. The MFI models predominantly exhibited crack initiation from the pre‐existing coal cracks and surface spalling caused by crack propagation. The intact composite sample failure presented as an instantaneous failure, whereas the composite samples containing the pre‐existing cracks showed a progressive failure. The failures of composite samples occurred predominantly within the coal and displayed an X‐typed shear failure accompanied by a small splitting failure. Both the coal and sandstone were destroyed in the composite sample with vertical penetration cracks through the centre of the coal. Failure of the coal occurred through a splitting failure accompanied by a small X‐typed shear failure, while the sandstone showed a splitting failure induced by crack propagation in the coal.Keywords
Funding Information
- National Natural Science Foundation of China (51904167, 51474134, 51774194, 51874189)
- Shandong University of Science and Technology (JQ201612)
- Ministry of Education of the People's Republic of China (JYBSYS2019201)
This publication has 15 references indexed in Scilit:
- Effects of coal's initial macro-cracks on rockburst tendency of rock–coal composite samplesRoyal Society Open Science, 2019
- Mechanical properties of oil shale-coal composite samplesInternational Journal of Rock Mechanics and Mining Sciences, 2019
- Effect of joint angle in coal on failure mechanical behaviour of roof rock–coal combined bodyQuarterly Journal of Engineering Geology and Hydrogeology, 2018
- An overview of integrated surface subsidence-reducing technology in mining areas of ChinaNatural Hazards, 2015
- Mechanical Behavior of Brittle Rock-Like Specimens with Pre-existing Fissures Under Uniaxial Loading: Experimental Studies and Particle Mechanics ApproachRock Mechanics and Rock Engineering, 2015
- Microseismic multi-parameter characteristics of rockburst hazard induced by hard roof fall and high stress concentrationInternational Journal of Rock Mechanics and Mining Sciences, 2015
- Compression–shear strength criterion of coal–rock combination model considering interface effectTunnelling and Underground Space Technology, 2015
- Effect of rock strength on failure mode and mechanical behavior of composite samplesArabian Journal of Geosciences, 2014
- Failure characteristics of three-body model composed of rock and coal with different strength and stiffnessTransactions of Nonferrous Metals Society of China, 2014
- The effect of loading rate on the behavior of samples composed of coal and rockInternational Journal of Rock Mechanics and Mining Sciences, 2013