Biomechanical Evaluation of 3 Stabilization Methods on Acromioclavicular Joint Dislocations
- 25 April 2013
- journal article
- research article
- Published by SAGE Publications in The American Journal of Sports Medicine
- Vol. 41 (6) , 1387-1394
Abstract
Background: Traumatic acromioclavicular (AC) joint dislocations can be addressed with several surgical stabilization techniques. The aim of this in vitro study was to evaluate biomechanical features of the native joint compared with 3 different stabilization methods: locking hook plate (HP), TightRope (TR), and bone anchor system (AS). Hypothesis: The HP provides higher stiffness than the anatomic reconstruction techniques. Study Design: Controlled laboratory study. Methods: A new biomechanical in vitro model of the AC joint was used to analyze joint stability after surgical repair (HP, TR, and AS). Eighteen cadaveric specimens were randomized for bone density and diameter in the midclavicle section. Joint stiffness was measured by applying an axial load and a defined physiological range of motion for internal and external rotations and upward and downward rotations. Data were recorded at 3 stages: for the native joint after dissecting the AC ligaments, directly after repair, and after axial cyclic loading (1000 cycles with 20 and 70 N at 1 Hz). To evaluate which implant mimics physiological joint properties best, axial stiffness of vertical stability was assessed in combination with rotation. Finally, static loading in the superior direction was applied until failure of the joints occurred. Results: Axial stiffness of the TR and AS groups was 2-fold higher than for the HP group and the native joint (67.1, 66.1, and 22.5 N/mm, respectively; P < .004). Decreased load-to-failure rates were recorded in the HP group compared with the TR and AS groups (248.9 ± 72.7, 832.0 ± 401.4, and 538.0 ± 166.1 N, respectively). The stiffness of the rotations was not significantly different between the treatment methods but was lower in horizontal and downward rotations compared with the native state. Thus, native AC ligaments contributed a significant share to joint stiffness. Conclusion: The TR and AS groups demonstrated higher vertical load capacity. Compared with the TR and AS, the HP demonstrated an axial stiffness closest to the native joint. For restoring physiological properties, reconstruction of the AC ligaments may be necessary. Clinical Relevance: The results show different biomechanical properties of the HP and anatomic reconstructions.Keywords
This publication has 27 references indexed in Scilit:
- Acromioclavicular reconstructions with hamstring tendon grafts: A comparative biomechanical studyJournal of Shoulder and Elbow Surgery, 2008
- Minimally Invasive Coracoclavicular Stabilization with Suture Anchors for Acute Acromioclavicular DislocationThe American Journal of Sports Medicine, 2008
- Arthroscopic reconstruction of the acromioclavicular joint disruption: surgical technique and preliminary resultsArchives of orthopaedic and trauma surgery, 2005
- Eine neue minimal-invasive arthroskopische Technik zur AkromioklavikulargelenkrekonstruktionDer Unfallchirurg, 2005
- Biomechanical Rationale for Development of Anatomical Reconstructions of Coracoclavicular Ligaments after Complete Acromioclavicular Joint DislocationsThe American Journal of Sports Medicine, 2004
- Stability of Acromioclavicular Joint ReconstructionThe American Journal of Sports Medicine, 2004
- Die Balser-Platte mit BandnahtDer Unfallchirurg, 2000
- Structural Properties of the Intact and the Reconstructed Coracoclavicular Ligament Complex The American Journal of Sports Medicine, 2000
- Magnetic Resonance Based Motion Analysis of the Shoulder During ElevationClinical Orthopaedics and Related Research, 2000
- Observations of the Function of the Shoulder JointClinical Orthopaedics and Related Research, 1996