Laboratory and large‐scale dust explosion research
Authors:
- 1 October 1992
- journal article
- research article
- Published by Wiley in Plant/Operations Progress
- Vol. 11 (4) , 247-255
Abstract
This paper describes dust explosibility research in full‐scale experimental mines and a 20‐L laboratory chamber at the U.S. Bureau of Mines and in a 1‐m3 laboratory chamber at Fike Corporation. The purpose of this research is to improve safety in mining and other industries that manufacture, process, or use combustible dusts. As part of this work, carbonaceous dusts with a wide range of volatilities and various particle size distributions were studied. Laboratory data on the minimum explosible concentrations of predispersed dusts were comparable to mine data for nominal dust loadings that were dispersed by the aerodynamic disturbance from a gas ignition zone. Recommendations are given on the limitations of small‐scale testing such as “overdriving” by too strong of an ignitor. The effect of dust particle size on explosibility data is illustrated for coal and aluminum dusts. For both dusts, the finest sizes were the most hazardous. The inerting requirements for preventing explosions were also measured in both laboratory and large‐scale systems. All the data show relatively good agreement between the laboratory and the large‐scale tests.Keywords
This publication has 17 references indexed in Scilit:
- Minimum Explosible Dust Concentrations Measured in 20-L and 1-M3ChambersCombustion Science and Technology, 1993
- Rapid Sampling of Products During Coal Mine ExplosionsCombustion Science and Technology, 1991
- Research on the Suppression of Coal Dust Explosions by Water Barriers1987
- Coal Dust and Gas Explosion Suppression by Barriers1987
- Investigations into the Buildup and Development Conditions of Coal Dust Explosions in a 700-m Underground Gallery1987
- Laboratory and Mine Dust Explosion Research at the Bureau of Mines1987
- 20-l explosibility test chamber for dusts and gasesReview of Scientific Instruments, 1985
- Rapid-sampling system for dusts and gasesReview of Scientific Instruments, 1983
- Infrared Pyrometers For Measuring Dust Explosion TemperaturesOptical Engineering, 1982
- Influence of reed current on dynamics of reed relaysComputers and Electrical Engineering, 1979