Adsorptive desulfurization of model gasoline by using modified bentonite
Authors:
- 21 November 2018
- journal article
- research article
- Published by Taylor & Francis in Journal of Sulfur Chemistry
- Vol. 40 (2) , 149-165
Abstract
This work involved the investigation on the removal of organic sulfur compounds from the model liquid fuels by using adsorption desulfurization (ADS) method. For this purpose, removal of 4-methyl dibenzothiophene (4-MDBT) in model gasoline streams with raw bentonite, nanobentonite and nanobentonite modified by nanomagnetite, active carbon and Ni(NO3)2.9H2O was considered. Various factors influencing the desulfurization capability, including loading and baking temperature were investigated. Thermo-gravimetric analysis (TGA), Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM) and energy dispersive X-ray spectrometry (EDX) showed that the ability of modified bentonite to adsorb 4-MDBT depends strongly on surface chemistry, particularly on the presence of basic oxygen-containing groups and acid content. The adsorbents tested for desulfurization capacity at breakthrough followed the order: 30wt% Fe3O4/30wt% Active carbon/40% Na -Nanobentonite > 30wt% Fe3O4/30wt% Active carbon/40% Ca – Nanobentonite > 30wt % Fe3O4/70% Ca-Nanobentonite > 15wt % Fe3O4/15wt% Ni/70% Ca– Nanobentonite. The results of preliminary tests for raw bentonite and nanobentonite were not significant in comparison with the modified nanobentonites: a, b, c, d samples, (about 40% lower than the four sample models). The optimum calcination temperature was 800°C. The multivariate methods were used for optimization of acceptance parameters. A Plackett–Burman design (PBD) was chosen as a screening method to estimate the relative influence of the factors that can be affected on the analytical response. Results show that surface area, pore size and pore volume of the bentonite can be increased several times using the impregnation method by 30wt% Fe3O4/30% active carbon. Also, the surface morphology of the bentonite is changed with this modification.Keywords
Funding Information
- Payame Noor University
This publication has 35 references indexed in Scilit:
- Pillared montmorillonite supported ferric oxalate as heterogeneous photo-Fenton catalyst for degradation of amoxicillinApplied Catalysis A: General, 2012
- Adsorption of Thiophene on Pt/Ag-Supported Activated Carbons Prepared by Ultrasonic-Assisted ImpregnationIndustrial & Engineering Chemistry Research, 2011
- The role of chemometrics in single and sequential extraction assays: A Review. Part II. Cluster analysis, multiple linear regression, mixture resolution, experimental design and other techniquesAnalytica Chimica Acta, 2011
- Reduction Behavior of Iron Oxide Sorbent and Its Effect on SulfidationEnergy & Fuels, 2010
- Adsorptive desulfurization by activated aluminaJournal of Hazardous Materials, 2009
- Sulfur removal from model diesel fuel using granular activated carbon from dates’ stones activated by ZnCl2Fuel, 2009
- Adsorption of Congo red from aqueous solutions onto Ca-bentoniteJournal of Hazardous Materials, 2009
- Synthesis and properties of magnetic Fe3O4-activated carbon nanocomposite particles for dye removalMaterials Letters, 2008
- Use of activated carbons prepared from sawdust and rice-husk for adsorption of acid dyes: a case study of Acid Yellow 36Dyes and Pigments, 2003
- A new thermally stable SiO2–Cr2O3 sol pillared montmorillonite with high surface areaApplied Catalysis A: General, 1998