Three-Dimensional Evaluation of Internal Structure of Coke Made by Blending Non-coking Coal Using X-ray Computed Tomography
Open Access
- 15 July 2024
- journal article
- research article
- Published by Iron and Steel Institute of Japan in ISIJ International
- Vol. 64 (9) , 1367-1375
Abstract
Image analysis was performed on the analytical objects constructed by X-ray computed tomography images of coke with anthracite as low swelling and softening-melting coal to evaluate the pore structure three-dimensionally. The sphericity of the pores was calculated based on the volume and surface area of the pores. Tracers were inserted into all anthracite particles to distinguish coke matrices derived from anthracite from those derived from coking coal. This is the first success in identifying coke matrices derived from coking coal and those derived from other carbon source. The sphericity of pores in the surrounding area of the coke matrix derived from anthracite and the area without coke matrix derived from anthracite was extracted from the analytical object. The surrounding area of the coke matrix derived from anthracite contained more low-sphericity pores compared to the area without coke matrix derived from anthracite. This may be due to the free expansion of the coking coal in the surrounding area of the anthracite since the anthracite does not soften or expand during carbonization. The coking coal expanded excessively to fill the voids between the particles, resulting in the bubbles bursting and generating connected pores.Keywords
This publication has 40 references indexed in Scilit:
- Migration of inert materials during coking of molded coalChemical Engineering Journal Advances, 2023
- Influence of coke structure on coke quality using image analysis methodInternational Journal of Coal Science & Technology, 2018
- Fractographic approach to metallurgical coke failure analysis. Part 1: Cokes of single coal originFuel, 2016
- Analysis of coke under compressive loading: A combined approach using micro-computed tomography, finite element analysis, and empirical models of porous structuresFuel, 2011
- Micro-finite element modelling of coke blends using X-ray microtomographyFuel, 2008
- Coal blending theory for dry coal charging processFuel, 2004
- Factors affecting the strength of blast furnace cokeFuel, 1991
- Physical testing of fuel briquettesFuel Processing Technology, 1990
- The strength of industrial cokes. 7. Further studies of the influence of additives in a coke-oven charge on the tensile strength of cokeFuel, 1978
- The strength of industrial cokes: Part 3. Tensile strength of blast-furnace cokesFuel, 1972