Relation between conductance, photoluminescence bands and structure of ITO nanoparticles prepared by various chemical methods
Authors:
- 30 June 2011
- journal article
- Published by Institution of Engineering and Technology (IET) in Micro & Nano Letters
- Vol. 6 (6) , 429-433
Abstract
To study the relation between conductance, photoluminescence bands and structure of indium tin oxide (ITO), nano- and microparticles of ITO were synthesised using various methods, including hydrothermal, oxalate precursor decomposition and Pechini type sol–gel combustion methods. The resultant powders were analysed by X-ray diffraction (XRD), resistance measurement, photoluminescence (PL) spectroscopy and scanning electron microscopy techniques. The crystallographic and microstructural parameters of samples were refined from the XRD patterns utilising Rietveld method. Two PL bands were observed in 475 and 560 nm and it was found that the low-energy PL band intensity presents direct relation with conductivity of samples while the other one shows inverse relation. Pechini samples demonstrated the highest conductivity and low-energy PL band intensity, while hydrothermal sample has low conductivity. It was suggested that the low-energy PL band is the characteristics of excitons trapped in oxygen vacancy while the high-energy PL band is attributed to the excitons trapped in other defects centre. The colour of samples and data resulted from XRD pattern refinement were also validated. According to the refinement results and Popa's model, all samples show anisotropic micro-strain and crystallite size. It was also deduced that hydrothermal sample was textured in the 〈111〉 direction.Keywords
This publication has 28 references indexed in Scilit:
- Effect of Ag addition on the structural and electrical properties of ITO powder compactAdvanced Powder Technology, 2010
- Crystallographic parameters and electro-optical constants in ITO thin filmsMaterials Characterization, 2010
- Synthesis of indium tin oxide powder by solid-phase reaction with microwave heatingAdvanced Powder Technology, 2009
- Solid-state mixed-potential sensor employing tin-doped indium oxide sensing electrode and scandium oxide-stabilised zirconia electrolyteAdvanced Powder Technology, 2009
- Direct synthesis of highly crystalline transparent conducting oxide nanoparticles by low pressure spray pyrolysisAdvanced Powder Technology, 2009
- Post annealing effects on the properties of sputtered nano-crystallite indium tin oxide thin films on flexible polyimide substratephysica status solidi (c), 2008
- Effect of sputtering pressure and annealing temperature on the properties of indium tin oxide thin filmsMaterials Science and Engineering: B, 2007
- NANOSTRUCTURE AND PROPERTIES OF INDIUM TIN OXIDE (ITO) FILMS PRODUCED BY ELECTRON BEAM EVAPORATIONModern Physics Letters B, 2006
- Synthesis and photoluminescence property of nanostructured sol–gel indium tin oxide film on glassChemical Physics Letters, 2005
- Structural properties of indium tin oxide thin films prepared for application in solar cellsMaterials Research Bulletin, 2005