Batch Scale Production of 3D Printed Extraction Sorbents Using a Low-Cost Modification to a Desktop Printer
- 30 August 2023
- journal article
- research article
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 95 (36) , 13417-13422
Abstract
This study reports a simple modification to a commercial resin 3D printer that significantly reduces the amount of prepolymer material needed for the production of extraction sorbents. The modified printing platform is demonstrated in the printing of two imidazolium-based ionic liquid (IL) monomers. Two geometries resembling a blade-type polymeric ionic liquid (PIL) sorbent used in thin-film microextraction and a fiber-type sorbent used in solid-phase microextraction (SPME) were printed. The SPME PIL sorbents were used to extract 10 organic contaminants, including plasticizers, antimicrobial agents, UV filters, and pesticides, from water followed by high-performance liquid chromatographic (HPLC) analysis. To compare the extraction performance of the SPME sorbents, seven fibers printed with the same prepolymer composition from the same printing batch as well as different batches were evaluated. The results revealed highly reproducible extraction efficiencies for all tested sorbents with no statistical difference in their extraction performance. Method validation showed acceptable linearity (R2 > 0.92) for all analytes with limits of detection and limits of quantification ranging from 0.13 to 45 μg L-1 and 0.43 to 150 μg L-1, respectively.Keywords
Funding Information
- Division of Chemistry (CHE-2203891)
- Basic Energy Sciences
- Iowa State University
This publication has 29 references indexed in Scilit:
- Crosslinked polymeric ionic liquids as solid-phase microextraction sorbent coatings for high performance liquid chromatographyJournal of Chromatography A, 2016
- A critical review of the state of the art of solid-phase microextraction of complex matrices I. Environmental analysisTrAC Trends in Analytical Chemistry, 2015
- Fully 3D-Printed Preconcentrator for Selective Extraction of Trace Elements in SeawaterAnalytical Chemistry, 2015
- 3D Printing Phosphonium Ionic Liquid Networks with Mask Projection MicrostereolithographyACS Macro Letters, 2014
- Combining 3D printing and liquid handling to produce user-friendly reactionware for chemical synthesis and purificationChemical Science, 2013
- Ultraviolet Photoinitiated On-Fiber Copolymerization of Ionic Liquid Sorbent Coatings for Headspace and Direct Immersion Solid-Phase MicroextractionAnalytical Chemistry, 2012
- Optimization of Fiber Coating Structure Enables Direct Immersion Solid Phase Microextraction and High-Throughput Determination of Complex SamplesAnalytical Chemistry, 2012
- Polymeric ionic liquids: Broadening the properties and applications of polyelectrolytesProgress in Polymer Science, 2011
- Determination of water pollutants by direct-immersion solid-phase microextraction using polymeric ionic liquid coatingsJournal of Chromatography A, 2010
- Thin-Film MicroextractionAnalytical Chemistry, 2003