Impact of Source/Drain contact and gate finger spacing on the RF reliability of 45-nm RF nMOSFETs
Authors:
- 1 April 2011
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 15417026,p. 5A.6.1-5A.6.6
Abstract
We report the radio frequency (RF) stress reliability response of 45-nm SOI RF nMOSFETs. The dependence of gate oxide degradation and off-state leakage (due to RF stress) on the contact spacing of the Source/Drain (S/D) terminals and the gate finger-to-gate finger spacing is investigated. The RF device performance trade-offs vs. RF stress reliability that result are investigated. Devices with “tight” S/D contact spacing have improved RF performance but worse RF reliability than devices with “loose” S/D contact spacing. Devices with “loose” gate-finger to gate-finger spacing have better RF performance and also better RF reliability. The net result of this investigation is that fundamental tradeoffs between RF performance and reliability exist at these advanced scaling nodes.Keywords
This publication has 11 references indexed in Scilit:
- Impact of body tie and Source/Drain contact spacing on the hot carrier reliability of 45-nm RF-CMOS2010
- Hot-Carrier Stress Effect on a CMOS 65-nm 60-GHz One-Stage Power AmplifierIEEE Electron Device Letters, 2010
- DC and RF Degradation Induced by High RF Power Stresses in 0.18- $\mu\hbox{m}$ nMOSFETsIEEE Transactions on Device and Materials Reliability, 2010
- MOSFET Degradation Under RF StressIEEE Transactions on Electron Devices, 2008
- Record RF performance of 45-nm SOI CMOS Technology2007
- A Simple and Useful Layout Scheme to Achieve Uniform Current Distribution for Multi-Finger Silicided Grounded-Gate NMOS2007
- Challenges and Opportunities for High Performance 32 nm CMOS Technology2006
- MOSFET Modeling for RF IC DesignIEEE Transactions on Electron Devices, 2005
- Hot carrier and soft breakdown effects on VCO performance2003
- Leakage current mechanisms and leakage reduction techniques in deep-submicrometer CMOS circuitsProceedings of the IEEE, 2003