Sine-Reference Band (SRB)-Controlled Average Current Technique for Phase-Cut Dimmable AC–DC Buck LED Lighting Driver Without Electrolytic Capacitor
- 29 September 2017
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 33 (8) , 6994-7009
Abstract
This paper presents a phase-cut dimmable AC-DC buck LED driver for electrolytic capacitor-less LED lighting applications. In the driver, the sine-reference band (SRB)-controlled average current technique is proposed to perform rectified sine-average current control and phase-cut dimming control. The rectified sine-average current control can regulate the average value of sine-wave LED current, maintaining a high power factor (PF) over a wide range of AC input voltage and output LED load. The phase-cut dimming control not only makes the LED driver compatible with two types of phase-cut dimmers, namely, leading-edge and trailing-edge dimming types, but also eliminates visible dimming flicker at the AC line frequency. Fabricated in a 0.35 μm CMOS process, experimental results show the line regulation of ± 2.36 % over 90 to 260 VAC and the load regulation of ± 0.65 % within the load range of 10 to 36 LEDs. The PF exceeds 0.95 under all conditions, and the peak efficiency of 90.7 % is achieved. The analysis of the flicker frequency verifies that the proposed dimmable LED driver completely eliminates visible flicker owing to the phase dimming variations without an output electrolytic capacitor.Keywords
This publication has 26 references indexed in Scilit:
- A 200-V 98.16%-Efficiency Buck LED Driver Using Integrated Current Control to Improve Current Accuracy for Large-Scale Single-String LED Backlighting ApplicationsIEEE Transactions on Power Electronics, 2015
- A 5.5W AC input converter-free LED driver with 82% low-frequency-flicker reduction, 88.2% efficiency and 0.92 power factor2015
- A 26 W 97%-Efficiency Fast-Settling Dimmable LED Driver With Dual-nMOS-Sensing Based Glitch-Tolerant Synchronous Current Control for High-Brightness Solid-State Lighting ApplicationsIEEE Journal of Solid-State Circuits, 2015
- A 40 V 10 W 93%-Efficiency Current-Accuracy-Enhanced Dimmable LED Driver With Adaptive Timing Difference Compensation for Solid-State Lighting ApplicationsIEEE Journal of Solid-State Circuits, 2014
- Variable Off-Time Control Loop for Current-Mode Floating Buck Converters in LED Driving ApplicationsIEEE Journal of Solid-State Circuits, 2014
- 90.6% efficient 11MHz 22W LED driver using GaN FETs and burst-mode controller with 0.96 power factor2013
- A low stand-by power start-up circuit for SMPS PWM controller2012
- A dimmable power supply unit for testing LED lamps built around a dedicated integrated circuit2011
- Illumination with solid state lighting technologyIEEE Journal of Selected Topics in Quantum Electronics, 2002
- New developments and future trends in high-efficiency lightingEngineering Science & Education Journal, 2000