Evaluating effects of biobased 2,5‐furandicarboxylate esters as plasticizers on the thermal and mechanical properties of poly (vinyl chloride)
Authors:
- 27 May 2014
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 131 (20)
Abstract
We synthesized 2,5‐furandicarboxylate esters [i.e., dibutylfuran‐2,5‐dicarboxylate, diisoamylfuran‐2,5‐dicarboxylate, and di(2‐ethylhexyl)furan‐2,5‐dicarboxylate] and investigated their potential application as plasticizers of commercial poly(vinyl chloride) (PVC) products. Fourier transform infrared analysis, mechanical tests, scanning electron microscopy investigation, differential scanning calorimetry analysis, dynamic mechanical thermal analysis, thermogravimetric analysis (TGA), melt flow rate (MFR) measurement, and plasticizer migration measurements were used to the evaluate the comprehensive properties of the blended products. The results of the tensile tests demonstrate that the blends exhibited antiplasticization and flexible plastic characteristics at 10 and 50 phr in PVC, respectively. Moreover, flexural and impact test data indicate that the three types of blends exhibited a similar tendency: the hardness decreased continuously as the amount of plasticizer increased. Their morphology indicated that all of the plasticizers had good compatibility with PVC. The resulting glass‐transition temperature of the investigated plasticizers was lower than that of pure PVC, and reduction was largest for the plasticizer with the highest molecular weight. TGA revealed that the thermal degradation of blended polymers occurred in three stages and that all of the blends were stable up to 180°C. Finally, the MFRs of all of the specimens indicated that the addition of a higher concentration of lower molecular weight biobased esters resulted in improved fluidity, but these compounds migrated more easily from the blends. Hence, 2,5‐furandicarboxylic acid derived from biomass has potential as a plasticizer. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014, 131, 40938.Keywords
This publication has 49 references indexed in Scilit:
- Epoxidation of modified natural plasticizer obtained from rice fatty acids and application on polyvinylchloride filmsJournal of Applied Polymer Science, 2012
- On the mechanism of selective oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid over supported Pt and Au catalystsGreen Chemistry, 2011
- Hydrotalcite-supported gold-nanoparticle-catalyzed highly efficient base-free aqueous oxidation of 5-hydroxymethylfurfural into 2,5-furandicarboxylic acid under atmospheric oxygen pressureGreen Chemistry, 2011
- Determination of the Di-(2-Ethylhexyl) Phthalate NOAEL for Reproductive Development in the Rat: Importance of the Retention of Extra Animals to AdulthoodToxicological Sciences, 2010
- A Reexamination of the PPAR-α Activation Mode of Action as a Basis for Assessing Human Cancer Risks of Environmental ContaminantsEnvironmental Health Perspectives, 2009
- Evaluation of the effects of biobased plasticizers on the thermal and mechanical properties of poly(vinyl chloride)Journal of Applied Polymer Science, 2006
- Tributyl citrate oligomers as plasticizers for poly (lactic acid): thermo-mechanical film properties and agingPolymer, 2003
- Kinetic studies of thermal degradation of natural cellulosic materialsThermochimica Acta, 1998
- Synthesis and evaluation of dialkyl furan‐2,5‐dicarboxylates as plasticizers for PVCJournal of Applied Polymer Science, 1994
- Poly (vinyl chloride) processing morphologyJournal of Vinyl and Additive Technology, 1980