Multiple kinetic Langmuir modeling to predict the environmental behaviour of As(v) in soils
- 6 May 2011
- journal article
- research article
- Published by Royal Society of Chemistry (RSC)
- Vol. 13 (6) , 1625-1633
Abstract
A soil with a relatively high Fe content (2.82% [w/w]) was loaded for up to one year with As(V) by equilibrating it with a solution containing 1000 mg l−1As(V) at a soil mass-to-solution ratio of 0.1 kg l−1. The incorporation of As(V) into the soil and its distribution over the soil phases were monitored by sampling at strategic time intervals using an operationally defined five-step sequential extraction procedure (Wenzel et al., Anal. Chim. Acta, 2001, 436, 309) and subsequent As measurement. A multiple kinetic Langmuir model was developed to retrieve the dynamic parameters (adsorption and desorption rate constants, capacities and Langmuir equilibrium constants) for each of the soil phases by numerical fitting of the experimental adsorption data to the model. Under the equilibration conditions used the adsorption rate constants for all five operationally defined soil phases were very similar but the desorption rate constants decreased by a factor of ca. 150 from soil phase 1 (non-specifically sorbed As) to 5 (residual phases). This implies that As(V) incorporation “deeper” into the soil leads to stronger binding which is associated with the Langmuir equilibrium constants (adsorption rate constants/desorption rate constants). Equilibration of the soil with As(V) was complete in ca. 10 days with As(V) predominantly bound to soil phase 2 (specifically sorbed As) and soil phase 3 (amorphous and poorly crystalline hydrous oxides). X-Ray absorption spectroscopy techniques revealed that these binding characteristics may be related to adsorption of As(V) on Si- and/or Al-containing structures and natural hydrous iron oxide (HFO) surface sites, respectively. Since the model is independent of the initial As(V) concentration in the solution and the soil mass-to-solution ratio, the behaviour of the thus characterized soil–As(V) system can be predicted for a range of conditions. Simulations showed that in an accidental As(V) spill the soil studied would actively scavenge As(V) by instantaneous adsorption onto all soil phases followed by redistribution of As(V) from weaker binding sites to stronger ones over time.Keywords
This publication has 34 references indexed in Scilit:
- Changes in arsenic speciation through a contaminated soil profile: A XAS based studyScience of The Total Environment, 2008
- An interdisciplinary physical–chemical approach for characterization of arsenic in a calciner residue dump in Cornwall (UK)Environmental Pollution, 2005
- EXAFS and XANES study of arsenic in contaminated soilX-Ray Spectrometry, 2005
- Adsorption Equilibrium and Adsorption Kinetics: A Unified ApproachChemical Engineering & Technology, 2004
- Extraction of Adsorbed Arsenic from IAEA-SOIL-5International Journal of Environmental Analytical Chemistry, 2003
- Competitive Adsorption of Arsenate and Arsenite on Oxides and Clay MineralsSoil Science Society of America Journal, 2002
- Arsenic fractionation in soils using an improved sequential extraction procedureAnalytica Chimica Acta, 2001
- The mechanism of anion adsorption on iron oxides: Evidence for the bonding of arsenate tetrahedra on free Fe(O, OH)6 edgesGeochimica et Cosmochimica Acta, 1995
- High-order multiple-scattering calculations of x-ray-absorption fine structurePhysical Review Letters, 1992
- Sequential extraction procedure for the speciation of particulate trace metalsAnalytical Chemistry, 1979