Experimental investigations of processing the high carbon cold-work tool steel 1.2358 by laser metal deposition for the additive manufacturing of cold forging tools
- 1 May 2017
- journal article
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 29 (2) , 022307
Abstract
In the field of tool making, Laser Beam Melting of metals has been already used to fabricate injection moulds with complex inner cooling channels made out of the low-carbon maraging tool steel X3NiCoMoTi18-9-5 (1.2709). Furthermore, laser metal deposition (LMD) is an established technology for the repair of worn-out tools and the deposition of wear resistance coatings based on metal matrix composites. However, at the moment, the processing of high-carbon tool steels for the additive manufacturing of complete cold forging tools has only been investigated to a limited extent. Within the scope of the presented research, the processing of the high-carbon cold-work tool steel 60CrMoV18-5 (1.2358) by LMD is analyzed in detail. In this context, geometrically simple cuboidal structures are directly generated on dissimilar substrate plates made out of the hot-work tool steel X37CrMoV5-1(1.2343) via the application of various process parameter combinations. The manufactured cuboidal structures are metallographically prepared and subsequently analyzed with respect to substrate bonding, relative density, defect formation, microstructure, chemical composition, and microhardness. In this context, the influence of the particle size distribution of the used tool steel powder on the LMD process itself and the resulting relative density are extensively researched. For this purpose, high-speed camera measurements of the powder particle stream were conducted in order to determine both the powder particle stream diameter and the lateral powder particle distribution with regard to the distance z from the powder nozzle. Furthermore, the influence of an additional substrate preheating (maximum preheating temperature of 400 °C) on the resulting microstructure and hardness of the additively generated samples is the subject of the presented investigations.Keywords
This publication has 9 references indexed in Scilit:
- Qualification of laser based additive production for manufacturing of forging ToolsMATEC Web of Conferences, 2015
- Effect of laser parameters on microstructure and hardness of laser clad and tempered AISI H13 tool steelSurface and Coatings Technology, 2014
- Microstructure and mechanical properties of hybrid fabricated 1Cr12Ni2WMoVNb steel by laser melting depositionChinese Journal of Aeronautics, 2013
- Laser-Assisted Fabrication of Materials2013
- Processing of Bulk Alumina Ceramics Using Laser Engineered Net ShapingInternational Journal of Applied Ceramic Technology, 2008
- An analytical model of beam attenuation and powder heating during coaxial laser direct metal depositionJournal of Physics D: Applied Physics, 2007
- Interaction between laser beam and powder stream in the process of laser cladding with powder feedingModelling and Simulation in Materials Science and Engineering, 2004
- Laser Material Processing2003
- Closed loop direct metal deposition: art to partOptics and Lasers in Engineering, 2000