Development of poly(dimethylsiloxane)–titania nanocomposites with controlled dielectric properties: Effect of heat treatment of titania on electrical properties
- 2 May 2012
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 127 (1) , 784-796
Abstract
Polymer–ceramic composites were prepared using poly(dimethylsiloxane) as base matrix and normal as well as heat‐treated titania as fillers. Dielectric and mechanical properties of the composites were measured and found that dielectric constant of the composites was increased dramatically with the addition of filler, whereas resistivity was decreased. Hardness and modulus were found to increase but tensile strength, % elongation at break, and tear strength were decreased with the filler loading. Neat titania contains some moisture (physisorbed and chemisorbed) as revealed from thermogravimetric analysis. Both electrical and mechanical properties of the composites were affected by filler heat treatment. Further, untreated titania contains Ti3+ and Ti4+, which on heat treatment, increases the concentration of Ti4+, as a result electrical properties were affected. Filler dispersion in the composites was studied by field emission scanning electron microscopy and high resolution transmission electron microscopy. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013Keywords
This publication has 35 references indexed in Scilit:
- A new self-cross-linked, net-structured, proton conducting polymer membrane for high temperature proton exchange membrane fuel cellsJournal of Membrane Science, 2010
- Synthesis and dielectric properties of polyaniline/titanium dioxide nanocompositesCeramics International, 2008
- Silicone rubber dielectrics modified by inorganic fillers for outdoor high voltage insulation applicationsIEEE Transactions on Dielectrics and Electrical Insulation, 2005
- Nanoclay‐induced morphology development in chaotic mixing of immiscible polymersJournal of Polymer Science Part B: Polymer Physics, 2005
- Effect of processing parameters, applied pressure and temperature on the electrical resistivity of rubber-based conductive compositesCarbon, 2002
- Rheological and dielectric studies of aggregation of barium titanate particles suspended in polydimethylsiloxanePolymer, 2000
- Functional polymersActa Materialia, 2000
- Electroceramic materialsActa Materialia, 2000
- Piezoelectric and dielectric properties of siloxane elastomers filled with bariumtitanateJournal of Polymer Science Part B: Polymer Physics, 1999
- Electrical and mechanical properties of conducting carbon black filled composites based on rubber and rubber blendsJournal of Applied Polymer Science, 1999