A study of nonlinear coupling dynamic characteristics of the cold rolling mill system under different rolling parameters
Authors:
Open Access
- 6 July 2017
- journal article
- research article
- Published by SAGE Publications in Advances in Mechanical Engineering
- Vol. 9 (7)
Abstract
The dynamic characteristics of the mill and the drive system are mutually coupled and affected closed-loop system. However, most research has considered only the vibration of the drive system or the vibration of the mill to determine the cause of the accident in the equipment condition monitoring and fault diagnosis process. Condition monitoring and fault diagnosis based on this type of approach can lead to misdiagnosis or missed diagnosis in determining faults in actual systems. So, in this study, a dynamic model of the coupling between a mill and its drive system was developed to study the interaction of the mill and the drive system with the goal of increasing the accuracy of diagnostic methods and to improve the quality of the rolled material. A nonlinear coupling dynamic model was formulated to represent the relation between the gearbox vibration amplitude and various time-varying parameters to study the effects of various parameters on the drive system vibration characteristic under unsteady lubrication. Simulations results showed that increasing the strip speed, the input strip thickness, or the output strip thickness or decreasing the lubricating oil temperature or the roller radius caused the vibration amplitude of the drive system to increase. The vibration frequency caused by variations in the strip inlet or outlet thickness can be transmitted to the drive system, and gear meshing frequency of the gearbox can be transmitted to the mill. Test data from an actual cold rolling mill verified the accuracy of the model. The model was shown to be capable of simulating the mutually coupled and affected mechanism between a mill and its drive system.Keywords
This publication has 14 references indexed in Scilit:
- Effect of rolling speed on microstructure and mechanical properties of as-cast AZ31B alloy under different reduction schedulesJournal of Materials Processing Technology, 2016
- High-speed rolling by hybrid-lubrication system in tandem cold rolling millsJournal of Materials Processing Technology, 2015
- Partial Film Lubrication Characteristics of Inlet Zone in Cold Strip RollingJournal of Tribology, 2014
- Torsional Vibration Analysis of the Main Drive System of a Rolling Mill with Impact of Multi-clearanceJournal of Mechanical Engineering, 2014
- Nonlinear Dynamics of Torsional Vibration for Rolling Mill’s Main Drive System Under Parametric ExcitationJournal of Iron and Steel Research International, 2013
- Tension and Thickness Control Strategy Analysis of Two Stands Reversible Cold Rolling MillJournal of Iron and Steel Research International, 2012
- On-line measurement method for various guide modes of vertical ring rolling millMeasurement, 2011
- Analysis of interface temperature, forward slip and lubricant influence on friction and wear in cold rollingWear, 2009
- The effect of roll roughness and lubricant viscosity on the loads on the mill during cold rolling of steel stripsJournal of Materials Processing Technology, 2005
- Numerical analysis of the vertical vibrations of rolling mills and their negative effect on the sheet qualityJournal of Materials Processing Technology, 2005